Description: 

FEATURES

- Supports CGA/EGA/YUV signal input.

- Supports VGA output 640*480,800*600,1024*768,1360*768

- CGA/EGA signal auto scan (15K,24K,31K)

- YUV signal auto scan (480i,576i,720i,1080i,480p,576p,720p,1080p)

- Chinese and English OSD.

- Supports position control & zoom control.

- True digital 24-bit A/D converter for true 16.7-million color conversion.

- Supports all VGA monitor (CRT、LCD、PDP、PROJECT……)

SPECIFICATIONS

MENU CONTROL

- “MENU” open OSD menu, and enter.

- “UP”    up and increase.

- “DOWN/AUTO” down and reduce.

Press this key: auto scan CGA/EGA signal

Press this key over 5 second and release: reset system

** (this operation is invalid when you open OSD menu)

-   “SW”    switch input signal Ypbpr/RGBS/RGBHV.

** (this operation is invalid when you open OSD menu)

- “Clamp sp” & “Clamp” please don’t adjust this button, except the monitor has black item or picture discoloration.

- For more functions control, please look at OSD to operate.

FAQ

No signal on you monitor

-please check the input and output cables, make sure all cables are connected. And make sure power is on.

The monitor says “No signal” 

-please press “SW” to switch input signal.

Input not supports

   -when your monitor displays “input not supports”, maybe you need change to low resolution.

Please press “DOWN/AUTO” over 5 second and release. Reset resolution to 800*600.

Image not full on you screen

   -please enter menu to adjust image position and zoom.

Image shake or freeze

   -please press “DOWN/AUTO”, system will auto scan input signal and restore image.

Have black item on screen, or all screen too black, or picture discoloration

   -please adjust “Clamp sp” and “Clamp st”, please keep “Clamp st” less than “Clamp sp”.

   -we suggest “Clamp st” SET “03” , “Clamp sp” SET “04”.

Image color not right            

-please adjust R\G\B VR.

Packing list :

1× Converter Board GBS8200

1× Connection Cable