Filament fiber is used as a lining for fireplaces. In biofireplaces, and gas fireplaces powered by natural gas, propane gas and propane-butane gas mixture. This product has been designed to glow with a bright, intense glow when placed in flames. The product is in the form of a wire and is based on a mixture of nine ingredients selected in such proportions to provide you with an unforgettable visual impression while maintaining adequate resistance to high temperatures. The material is ecological and does not contain any substances that have a negative impact on the natural environment. The product can be used in biofireplaces, i.e. devices powered by bioethanol, the combustion of which results only in carbon dioxide and water vapor. Filament can also be used in gas heating devices. In the set, the user receives a 1-gram package with instructions for use. (the package contains 1g + 3-10% of the allowance).

PLEASE NOTE THAT TO COVER SOME FIREPLACES MORE THEN ONE GRAM OF MATERIAL IS RECOMMENDED

ONE GRAM OF MATERIAL COVER DIAMETER OF UP TO 30CM X 3CM 

The fibers should be removed from the package and spread unevenly on a flat surface. The individual sections should be mixed together in such a way as to create a mesh (as shown in the pictures), the degree of compaction of which will ensure the free flow of the flame through the material. The material prepared in this way should be placed directly on the burner of the device in which it is to be used. If the filament is used in gas fireplaces using ignition devices equipped with a magneto, the filaments should be placed away from the ignition module due to the possibility of punctures. The material is neutral to other decorative elements used in biofireplaces and gas fireplaces. The product does not emit any hazardous substances.

When the product is removed from the flames, it immediately loses its temperature, so touching it does not cause burns.

One package of fiber is enough to decorate a burner with dimensions up to 30 x 3 cm. For larger burners (especially gas burners), the use of more material is recommended. Our glow filaments have a very high thermal resistance and can be used for several hundred hours. After this time, the fiber does not lose its visual properties and still pleases the user with a beautiful glow imitating the effect of glowing wood, and only curls, reducing the volume of the originally created shape.

When using the product, some basic rules should be followed:

- If the fiber placed in the bio-fireplace, before it is put out, the material should be removed from the burner.

- Incandescent fibers may only be used for decorative purposes in gas fireplaces or biofireplaces.

- Using too much material will reduce the flame. It can also have a negative effect on the combustion process - never place too many fibers that could obscure the flame!

- The device in which the fiber is installed should not be exposed to gusts of air.

- Filament should be kept away from children and other unaware people

- The product should be placed in nylon gloves, which should then be discarded (the diameter of the fibers is smaller than the diameter of the hair, so it is recommended to remove and arrange them with care, vacuum the residues) so as to make sure that they will not come into contact with children or animals or people in need of rest. In case of contact with eyes, rinse with cool water.