Cold Spark Firework Machine Wedding Remote Control Receive Stage Effect Fountain
Note: Due to shipping restrictions, Fireworks are not included. You'll easily buy them at your local shop.
Package：
8pcs cold fireworks base receiving box
1pc 1 key remote control
1pc 4 keys remote control
Instructions for use
1. Turn on the power switch, the Green (POWER) indicator light is on and the White (TEST) indicator light and turns into - Red, press the corresponding button of the remote control, the White indicator light flashes Red, indicating the remote control receive normal.
2. Connect the product link cable to the receiving box connector, the White indicator light - (TEST) turns Red and it is brighter, indicating that the product is connected normally.
3. Keep away from a safe distance, press the corresponding button on the remote control to ignite;
4. Remote control code matching (the product cannot be connected during code matching), first find the small hole under the power supply of the receiving box and press the button inside the small hole with a small button, the green light flashes, press the 1 button for remote control respectively, and the 4 button remote control needs to be paired. code key, the white indicator flashes red and the code is successfully matched.
5. Charging, the machine needs to be charged for 2 hours before each use. The charging time should not be too long to avoid the danger of battery explosion. It is recommended to disconnect after two hours, and the power switch should be turned to "off" when charging.there must be no flammable objects next to the machine. Insert the charging plug into the 220V power socket, the red light (CHARGE) is on, and the charging is normal. The green (POWER) indicator light is not very bright to indicate that it needs to be charged.
2. Connect the product link cable to the receiving box connector, the White indicator light - (TEST) turns Red and it is brighter, indicating that the product is connected normally.
3. Keep away from a safe distance, press the corresponding button on the remote control to ignite;
4. Remote control code matching (the product cannot be connected during code matching), first find the small hole under the power supply of the receiving box and press the button inside the small hole with a small button, the green light flashes, press the 1 button for remote control respectively, and the 4 button remote control needs to be paired. code key, the white indicator flashes red and the code is successfully matched.
5. Charging, the machine needs to be charged for 2 hours before each use. The charging time should not be too long to avoid the danger of battery explosion. It is recommended to disconnect after two hours, and the power switch should be turned to "off" when charging.there must be no flammable objects next to the machine. Insert the charging plug into the 220V power socket, the red light (CHARGE) is on, and the charging is normal. The green (POWER) indicator light is not very bright to indicate that it needs to be charged.
Attention：
1. When not in use after the line is connected, be careful not to strongly vibrate the receiving box.
2. When the receiving box starts to connect to the product, be sure to keep the remote control to avoid injury caused by misoperation.
3. The remote control adopts rolling code design, and the repeated code rate is extremely small, but there is also the possibility of repeated code. Always maintain a safe distance from the start of connecting the product.
4. When the product is not in use, it should be charged once every 10 days, so that the battery does not lose power
5. Do not place the product in a humid, acid-base and other environment.
2. When the receiving box starts to connect to the product, be sure to keep the remote control to avoid injury caused by misoperation.
3. The remote control adopts rolling code design, and the repeated code rate is extremely small, but there is also the possibility of repeated code. Always maintain a safe distance from the start of connecting the product.
4. When the product is not in use, it should be charged once every 10 days, so that the battery does not lose power
5. Do not place the product in a humid, acid-base and other environment.
On 25-May-22 at 09:59:27 BST, seller added the following information: