Ultra Pro 5CH CV DMX RDM Digital PWM Decoder 8/16 bits for RGB & RGBW LED

---

Product Overview

The DMX decoder is designed with 5 channels, 8A per channel constant voltage
output and available in 12VDC and 24VDC. There are total 5 PWM output channels
with common anode and DMX channel quantity can be settable from 1CH to 5CH.
DMX address can be set and displayed via the numeric digital display. High
frequency 16bit and low frequency 8bit PWM output resolution are available and
switchable, and default setting is 16bit. 10 levels of PWM output frequency
are optional from 500Hz-30kHz, default setting is 1kHz. Gamma ray dimming
curve value is adjustable from 0.1-9.9, and logarithmic dimming and linear
dimming are optional. DMX Decoding modes are optional and enable to adjust
brightness of each output channel, master brightness of all output channels
and strobe effects, and default mode is dp1.1. Key Features Industrial level
DMX512 & RDM decoder Comply with the latest DMX512, DMX512(1990), DMX512-A,
RDM V1.0 (E1.20 - 2006 ESTA Standard) standard protocols, compatible with
DMX512 master consoles from other international incorporations Total 5 PWM
output channels, common anode. DMX channel quantity from 1CH to 5CH settable
8A 5 channels constant voltage output Abundant DMX signal input and output
port design: XLR 5pin, XLR 3pin, RJ45, Screw DMX RDM bi-directional
communication function Enable DMX512 master console to detect decoder, display
decoder information and set DMX address Visible numeric digital display
operation interface with a variety of features selection PWM output high
frequency 16bit and low frequency 8bit switchable, default setting is 16bit 10
levels of PWM output frequency optional from 500Hz-30kHz, default setting is
1kHz Decoding modes optional, enable to adjust brightness of each channel,
master brightness of all channels and strobe effects, default mode is dp1.1
Gamma ray curves value adjustable from 0.1-9.9, logarithmic dimming and linear
dimming optional