Excellent in service & quality
Shipping at PRIME speed
25,000+ satisfied customers
✅ Cheap ✅ Quality ✉ Shipping by 2 p.m. ☎ Telephone service ⭐ Order now ➡ 2x rubber insert rear lock for PORSCHE 924 944 968 trunk tailgate

Now new and only available from partworks

Description:
The old locks on the Porsche 924, 944 and 968 tailgates often have the problem of creaking and rattling noises when driving. The reason lies in this silicone insert: Hardly any vehicle has the original rubber inserts in the lock still intact, so that the rear window pins can move back and forth undamped by body movements. The formerly white material is still completely preserved in hardly any vehicle and is usually very dark in color and crumbled. The funnel-shaped insert is pressed into the trunk lid locks from above. After cleaning and greasing the pawls in the lock, you can simply squeeze the rubber inserts into the lock from above. Seen in red in our example photo, the four rings arranged in a ring must protrude out of the lock again. This way you can eliminate the unpleasant noises from the rear window and completely overhaul your rear locks.

partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.

Reference numbers:
Attention, with this article the vehicle manufacturer has changed the scope of delivery behind the updated OE number over time or may have reduced several variants of a part to just one variant. In some cases this may not have been correct. Below we have listed both old and new OE numbers for the component. If in doubt, please check our product images to ensure that it is exactly the product you expect.

477827505A
94453895600, 944.538.956.00, 944 538 956 00
94453895500, 944.538.955.00, 944 538 955 00
94453895501, 944.538.955.01, 944 538 955 01
94453895601, 944.538.956.01, 944 538 956 01
94453805604, 944.538.056.04, 944 538 056 04
477827505
477827506
477827506A
94453805603, 944.538.056.03, 944 538 056 03
94453805601, 944.538.056.01, 944 538 056 01
94453805503, 944.538.055.03, 944 538 055 03
94453805501, 944.538.055.01, 944 538 055 01
94453805500, 944.538.055.00, 944 538 055 00
94453805600, 944.538.056.00, 944 538 056 00


Scope of delivery:
see illustration

Suitable for :
924
944
968Item number: 5947
2x rubber insert rear lock for PORSCHE 924 944 968 trunk tailgate

Now new and only available from partworks

Description:
The old locks on the Porsche 924, 944 and 968 tailgates often have the problem of creaking and rattling noises when driving. The reason lies in this silicone insert: Hardly any vehicle has the original rubber inserts in the lock still intact, so that the rear window pins can move back and forth undamped by body movements. The formerly white material is still completely preserved in hardly any vehicle and is usually very dark in color and crumbled. The funnel-shaped insert is pressed into the trunk lid locks from above. After cleaning and greasing the pawls in the lock, you can simply squeeze the rubber inserts into the lock from above. Seen in red in our example photo, the four rings arranged in a ring must protrude out of the lock again. This way you can eliminate the unpleasant noises from the rear window and completely overhaul your rear locks.

partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand.

Reference numbers:
Attention, with this article the vehicle manufacturer has changed the scope of delivery behind the updated OE number over time or may have reduced several variants of a part to just one variant. In some cases this may not have been correct. Below we have listed both old and new OE numbers for the component. If in doubt, please check our product images to ensure that it is exactly the product you expect.

477827505A
94453895600, 944.538.956.00, 944 538 956 00
94453895500, 944.538.955.00, 944 538 955 00
94453895501, 944.538.955.01, 944 538 955 01
94453895601, 944.538.956.01, 944 538 956 01
94453805604, 944.538.056.04, 944 538 056 04
477827505
477827506
477827506A
94453805603, 944.538.056.03, 944 538 056 03
94453805601, 944.538.056.01, 944 538 056 01
94453805503, 944.538.055.03, 944 538 055 03
94453805501, 944.538.055.01, 944 538 055 01
94453805500, 944.538.055.00, 944 538 055 00
94453805600, 944.538.056.00, 944 538 056 00


Scope of delivery:
see illustration

Suitable for :
924
944
968

Item number: 5947
Click on the image below and then click on "See details".
You have the following payment options in our eBay shop:


We politely ask you to make an appointment before collection.

A notice: Payment methods may differ on eBay marketplaces outside Germany.
We, the partworks company from Paderborn, specialize in young and vintage cars, especially the Porsche brand. Our focus is on special parts that are not available through regular specialist retailers or vehicle manufacturers. Our products come from our own development as well as from friendly, global companies that have the same goal as us: making available what no longer exists.

partworks: the part works - your legend runs.

Top online shop according to Excellent.org
DIN-ISO 9001 certified quality management
Recognized training company

If you are missing something in our program, just talk to us and we may already have a solution.

Be a part of our community!

SAVE Visit our eBay shop to find out about new products and discount promotions.
✅ Cheap ✅ Quality ✉ Shipping by 2 p.m. ☎ Telephone service ⭐ Order now ➡ 2x rubber insert rear lock for PORSCHE 924 944 968 trunk tailgateNow new and only available from partworksDescription:The old locks on the Porsche 924, 944 and 968 tailgates often have the problem of creaking and rattling noises when driving. The reason lies in this silicone insert: Hardly any vehicle has the original rubber inserts in the lock still intact, so that the rear window pins can move back and forth undamped by body movements. The formerly white material is still completely preserved in hardly any vehicle and is usually very dark in color and crumbled. The funnel-shaped insert is pressed into the trunk lid locks from above. After cleaning and greasing the pawls in the lock, you can simply squeeze the rubber