Brand new aftermarket Stator

Plug-and-play, direct fit, easy installation

Highest grade of lamination materials

Highest grade of copper winding, resistant to 200 degrees Celsius.

All products shipped are tested

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Brand new aftermarket Stator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation
• Highest grade of lamination materials
• Connectors included
• Highest grade of copper winding, resistant to 200 degrees Celsius.
• All products shipped are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Lynx Racing -- 2004
Lynx Rave 440 -- 2005

410922952
410922967

Dimensions :
Interior diameter : 40 mm
Exterior diameter : 103 mm
Thickness : 30 mm
Length of wires : 350 & 380 mm

Other specifications :
Number of wires : 7
Number of plugs : 2
Number of pins : 7
Number of poles : 12

Wire to wire resistance :
Alternator : Between each Yellow = 0.2 ohms +-20%
Source #1: Black/Red to Red = 30 ohms +-20%
Source #2: Black/Red to White = 5 ohms +-20%

Before installing your new stator

• Check the AC output of the stator
• Replace any burned or corroded connectors on stator and regulator rectifier
• Check and repair any melted wiring
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".