Features:

- Only supports 5V voltage receiver, otherwise the module may be damaged. If the receiver and steering gear use high voltage system, you should add a step-down module to the module.

- One steering gear signal input, control one electronic switch

- Normally open end supports 20A current

- One LED indicates working status

- With boot protection function, easy to operate

- The input channel does not need to be calibrated, compatible with all brands of remote control equipment

- Adopting double-sided adhesive tape on the back, the appearance is clear at a glance

- Small size and light weight

- This device does not require calibration and can be accurately compatible with remote control devices of various brands.

Scope of Application:

- Remote control model rocket launch

- Remote control model smoke control

- Weapon system control like real machine

- Smoke control of model aircraft

- Control of various remote switch systems

- Switch the signal of the two cameras

- Control the power on and off of various electrical appliances, such as navigation lights, search lights, strobe lights, buzzers, etc.

- Control the camera shutter, or switch the camera's video and camera modes.

★ Function Description:

The remote switch remotely controls the electrical equipment on the aircraft model through a switch channel on the remote control, and 1 LED dynamically demonstrates the current switch status in real time, so you can quickly get started without an operation manual.

Typical Application:

1. Connect

-Insert the signal input cable into an idle receiver channel, which corresponds to a switch on the remote control.

When connected to the receiver, the power indicator will be lit.

-When the switch channel is open, the work indicator lights up, on the contrary it is closed.

2. Working mode

-The red LED light indicates the power indicator.

-The blue LED light indicates the working status of the relay.

3. Trigger

-Turn the switch (OFF-> ON) on the remote control, the green LED light is on and the relay starts to work.

Package include:

1pcs x J1 relay