This item includes:
  • 1 pieces nema 34 stepper motor 34HS5435C-37B2 1600oz.in 151mm single shaft
  • 1 pc nema 34 stepper motor driver , peak 7.8A ,24-80VDC, 256 micsteps，High Perfermance
  • 2 pc Nema 23 stepper motor 425 oz.in 3A φ8MM 112MM 23HS9430
  • 2 pc nema 23 stepper motor driver , peak 4.2A ,18-50VDC, 128 micsteps,Replacing M542
  • 1 pc Power supply 350W-60V/5.83A（power for Nema 34 motor）
  • 1 pc Power supply 350W-36V/9.7A（power for Nema 23 motor）
  • 1 pc Breakout board（free offerimg when you bought all these above）

Detailed information:

1. nema 34 stepper motor specification table:

                  Model
Step angle
 ( ° )
Motor Length L(mm)Rate Voltage
(V)		Rate Current (A)
Phase Resistance ( Ω )
Phase Inductance (mH)Holding Torque (oz.in)Lead Wire (NO.)
Rotor Inertia 
(kg. cm)
Motor          Weight (kg)
34HS5435C-37B2
   1.8  151
 5.7 3.5     1.9     22

1600

4

3.6
  5

 nema 23 stepper motor specification table:

   Model
Step angle
 ( ° )
Motor Length L(mm)
Rate Voltage
(V)
Rate Current (A)
Phase Resistance ( Ω )
Phase Inductance (mH)
Holding Torque (oz.in)
Lead Wire (NO.)
Rotor Inertia 
(kg. cm)
 Motor          Weight (kg)
               
23HS9430

1.8
112
6.4
3
     2.1
    9

425
4
0.89
 
   1.7



2. Nema34 Stepper motor driver 7.8A 256micsteps

2.SINGLE shaft nema 23 step stepper motor drive/driver DM542A:

Introduction:
    DM542A is a type of two-phase hybrid stepping motor driver, the drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Holding torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.
Features:
-High performance, low price
-Average current control, 2-phase sinusoidal output current drive
-Supply voltage from 18VDC to 50VDC
-Opto-isolated signal I/O
-Overvoltage, under voltage, overcorrect, phase short circuit protection
-15 channels subdivision and automatic idle-current reduction
-8 channels output phase current setting
-Offline command input terminal
-Motor torque is related with speed, but not related with step/revolution
-High start speed
-High holding torque under high speed

Electrical specification:

Input voltage18-50VDC
Input current＜ 4A
Output current1.0A～4.2A
ConsumptionConsumption：80W；  Internal Insurance：6A
TemperatureWorking Temperature -10～45℃；
Stocking temperature -40℃～70℃
HumidityNot condensation, no water droplets
gasProhibition of combustible gases and conductive dust
weight200G

SINGLE shaft nema 34 step stepper motor drive/driver DM860A:

Introduction:

    nema 34 step stepper motor driver DM860A is a type of two-phase hybrid stepping motor driver, the drive voltage of which is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter and less than 8.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Holding torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.

Features:
1. High performance, low price
2. Average current control, 2-phase sinusoidal output current drive
3. Supply voltage from 24VDC to 80VDC
4. Opto-isolated signal I/O
5. Overvoltage, under voltage, overcorrect, phase short circuit protection
6. 14 channels subdivision and automatic idle-current reduction
7. 8 channels output phase current setting
8. Offline command input terminal
9. Motor torque is related with speed, but not related with step/revolution
10. High start speed
11. High holding torque under high speed

3.Power Supply

350W-36V----The power is 350Watts, and the output voltage is 36VDC.

350W-60V----The power is 350Watts, and the output voltage is 60VDC.


4.Breakout board

General in the software

P2 P3 is set to X-axis for the X-axis pulse

P4 P5 is set to Y-axis, Y axis pulse

P6 P7 is set to Z-axis Z-axis pulse

The other can be set to A B C axis

A-axis pulse P8 P9 is set as the A axis

P14 is set to B-axis B-axis pulse P1

P16 P17 is set to C-axis, C axis pulse

Can also be set to the spindle control signal \ electrical permit

Input interface for the P10 P11 P12 P13 P15


Description:
• Built in DB25 male connector.
• DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
• DB25 Input Pin: P10,P11,P12,P13,P15.
• DB25 GND Pin: P18-P25.
• Power supply: +5V DC.
• Built in C-class Optical-coupler.
• High quality with Surface-mount Tech

Shipping：☟

☛We have warehouses in United States. If you are in USA,our products can be delivered quickly.Via DHL or UPS.We don't ship to island.

☛We have economical express delivery to most countries,Via DHL /UPS/FEDEX /China Post/EMS.

☛There is online tracking numberafter the item shipped.

 

Payment：☟

☛ We accept paypal credit and bank transfer.

☛ Payment must be made within 7 days of the auction end time.

☛ Please make sure that your shipping address is correct.

 

Problem and Feedback：☟

☛If you satisfied with goods,please give 5 points of feed back

☛Item as Described★★★★★

☛Commuication★★★★★

☛Shipping Speed★★★★★

☛If you have problem on product or want product,please connect me, send e-mail to me.

 

Refound：☟

☛If you are not satisfied the package,please tell us the reason.

☛Delivery cost is paid by buyer.

 

Application：☟

☛Our products are mainly used in CNC machine,Carver machine,Dispenses,3D Printer,

☛Stage Hghting, Medical machine,Household Applicance,Engraver Machine and so on.