Brand new aftermarket stator
Plug-and-play unit, direct fit, easy to install.
Highest grade copper windings, resistant to 200 degrees Celsius
All products shipped are tested
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Arctic Cat King Cat 900 Carb L/C -- 2004-2005
Arctic Cat Mountain Cat 800 Carb L/C -- 2001-2002
Arctic Cat Mountain Cat 900 Carb L/C -- 2003-2004
Arctic Cat ZL 800 Carb L/C -- 2001
Arctic Cat ZR 440 Sno Pro Carb L/C -- 2000-2001
Arctic Cat ZR 800 Carb L/C -- 2001-2002
Arctic Cat ZR 900 Carb L/C -- 2003-2005
Arctic Cat ZR 900 Sno Pro Carb L/C -- 2003-2005
3005-727
3005-805
3005-784
Dimensions :
Interior diameter : 37 mm
Exterior diameter : 98 mm
Thickness : 20 mm
Length of wires stator to plug : 160 mm
Other specifications :
Number of wires : 9
Number of plugs : 6
Number of pins : 10
Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4 ohms +-20%
Before installing your new stator
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
find parts for :