USB to TTL PL2303HX Serial Connectors Module Adapters COM Converters RS232


-
USB To RS232 TTL UART PL2303HX Auto Converter USB to COM Cable Adapter Module 
Supports baud rate from 75 to 128000 
Support Linux, Mac OS, WinCE and Windows (XP, Vista Win 7 inc 64 Bit Edition) 
PL2303HX USB to Serial Controller adopted 
4 connecting wires, 2.54mm pitch type 

Wire sequence is defined: 
Red Wire: VCC, (+5V) 
Black Wire: GND 
Green Wire: TXD 
White Wire: RXD 
Length: Approx 1M 

Connection method: Brush requires only three lines, generally used only three signal lines RX TX GND, VCC. 

Note: 
After setting 3.3V and 5.0V output (this is to the microcontroller power supply, no need to upgrade the machine)please put the small plate unplug from the computer, set the jumper to take, do not charged to avoid damage to the device. 

Pin connection and description: 
Connector pin assignments before you must find, especially GND must not be connected to the voltage pin, andRX and TX side do not connected to the VCC pin, the (actual measurement had some VCC pin voltage up to 14V.) Wrong shall be burnt chip adapter cable, be sure to note, do not take their own small board to do the experiment, 

Connection: 
RX for TX; 
TX to RX; 
Ground-ground (GND to GND) 
USB to serial platelet function: 
1 simple serial communication. 
2 or ADSL router firmware upgrade. 
3 GPS serial communication. 
4 hard drive firmware upgrade. 
5 easy to use, RX received the MCU TX; TX RX received at the MCU connected to ground. Without the need for conversion MAX232. 
6 Super Terminal in use; common serial debugging tools. 
7 upgrade with a variety of satellite machine. 
And other general-purpose USB-to-serial small board
-



Orders before 12AM, London time, are dispatched same working day.
Orders from Friday afternoon, Saturday and Sunday are dispatched in Monday.



Orders are dispatched, after payment is received.
Accept Paypal Only