Wide Working Voltage Range: 5~ 14VDC;
Max. Static Lift: ~ 10 m at 12VDC;
Max. Horizontal Flow Rate: 3100L/H;
Both inlet and outlet are threaded, with external diameter of ~ 25mm (3/4'' threaded)
Main Features
Brushless DC motor, also known as EC motor; Magnetic Driven (NO DIRECT AC 100-240V POWER CONNECTION, PROHIBITED);
Small size but strong; Low consumption & High Efficiency;
Long time continuous working with low noise;
Safety - no spark, Explosion - proof; Low noise about 40dB;
Amphibious; Max Working Temperature: 100 degree (Recommended to be out of water at high temperature);
Wide range of working voltage; Maintenance - free;
Can be used to pump water, oil, weak acid and alkali solution (special liquids are needed to be pre-tested in advance);
Variety Power: DC electric source, Battery or Solar Panel, etc;
Soft Start with Low in-rush current;
Eco-friendly material design
OEM and ODM are accepted based on MOQ and exact inquiry of customers.
Specifications
Model: DC60G-12100S, 12VDC BRUSHLESS DC WATER PUMP OF OUR SERIES. | ||
Size: 141.3 mm x 100 mm x 118.9 mm | Weight: ~1.3 Kg | Material: Engineering Plastics |
Inlet: appr. 25mm (3/4'' threaded) | Outlet: appr. 25mm (3/4'' threaded) | Heat Resistance: -10 ~100°C |
Rated Voltage: DC 12V | Rated Current: 6.6A | Power Consumption: ~80W @12VDC |
Static Head: 10 meters @12VDC | Flow Rate: 3100L/H @12VDC | |
Plug: 5.5×2.1 DC Plug (compatible with 5.5x 2.5) | Cable Length: 1.5 meters | Working: Support Continuous Work |
Noise: about 40dB | Water Proof: 100% | Submersible: Yes (Sure, Some preparation are needed.) |
Driven: Brushless Magnetic | Self-priming: No | Speed Adjustable: NOT SUPPORTED BY THIS MODEL |
Package includes:
1 x All-new Original DC60G-12100S Powerful 12VDC Micro DC Pump
(No power supply is included)
(If
it is an AC/DC power adapter that is used to run the pump, the output
capacity of the adapter will be required to be 12VDC, 8A~10A.
Otherwise, it could be less powerful than needed to drive the pump. )
Some functions can be achieved through customization, based on MOQ and exact inquiry of customers.
Regarding
DC60 series or DC80 series pumps, there are some notes (Not only
refering to current pump model listed on this page), As follows.
IMPORTANT!
IMPORTANT NOTE: It’s MORE
RECOMMENDED that pump is installed at Land use. If really really have to
be installed over water, it’s STRONGLY recommended that some more firm
waterproof tape is closely wrapped on the TAIL connection with pump body
(connection point between cable and pump body), to enhance its
water-leakage-proof performance and avoid risk of possible leakage. DRY-RUN
PROTECTION feature is now equiped in the pump’s design. Pump works at
rated voltage: when water flow is gone or in-sufficient, pump will auto
access protection mode: run & stop, run & stop, ..., to protect
pump’s motor part from being physically damaged from long time extensive
friction and heat at continuous dry run; when water flow is back to
sufficient status, pump will immediately normally run. This can help
avoid that pump can be easily dead when it dry runs for long time. -- It
is the NEW feature! (P.S.: Of course, very long time dry run will still
need to be avoided by us as users, since pump won't stop but its
running sharply slows in this context. )
As
micro brushless dc pump, it works via electronic commutation while not
brush friction, so there exists no loss caused by brush friction. Pump
works with relatively high efficiency.
Pump supports continuous
long time work with relatively low noise at normal working
environment.land use or submersible installation (Some extra attention
needs to be paid to, as mentioned in the final clause) can be both OK,
but it cannot be self-priming, just make sure that fluid can actively
flow passing through inlet/outlet because pump works via centrifugal
force of high-speed rotation of impeller inside (push/throw fluid out).
No long-time dry work without fluid, or it may damage the pump.
DC 12V or DC 24V power supply (Depending on rated voltage of pump). No direct AC power powering or over-voltage powering.
Do
NOT throw the pump or install it violently, as it could damage the pump
body. Do NOT throw the pump directly through the cable, to avoid damage
of cable. FIX the pump somewhere at work, to avoid its moving at run,
causing little in-flow and dry run, though pump has dry-run protection
mechanism designed inside.
If it is AC/DC Power adapter, make
sure that it can offer sufficient power to pump. (For example, if it is
24VDC 100W pump, then AC/DC power adapter must have output capacity of
24VDC, >=6A; if it is 12VDC 80W pump, then AC/DC power adapter must
have output capacity of 12VDC, 7A or more. Otherwise, it is less
powerful to run the pump. Other pumps will be applied with similar
mechanism.)
Do not directly throw or pick the pump through its
cable, since it could damage the cable, especially at connection point
between cable and pump body.
Our pump products can be widely used in various kinds of fields, such as computer cooling system, solar fountain,
arts and crafts, parts of water heater, plumbing mattresses, micro solar fountain, bidets, swimming pool, foot massage
basin, body massage bathtub, car cooling system, fueller, humidifier, air conditioner, medical device, and many other
cooling and circulation system.
1. Please make sure whether item(s) you want to order is/are the right one(s) you need and we do advise that customer friends pre-contact us about relevant issue if you are not sure, to avoid possible extra waste caused by inappropriate choice.
2. Import duties, taxes and charges are not included in item price or shipping charges and Customs clearance is buyer’s responsibility. Please check with your local Customs authorities before purchase.
(If respected customer doesn't undertake Customs clearance duty, all relevant loss will be customer's duty; when in need, we as responsible vendor will provide all essential documents to help complete Customs clearance, within our ability)
1. We accept direct order payment on eBay itself.
2. Bulk orders can be accepted. Products are always full in stock, or can be customized for specific requirement after communication
1. Your item(s) will be shipped out within 1-2 business days after order payment has been successfully verified on eBay platform.
2. In order for us to have PayPal seller protection, we only ship to address shown in your PayPal payment. We DO NOT ship to any other address requested by email or eBay message.
3. We will pack your item(s) carefully and safely to avoid any damage during transmit; each package has its own tracking No., which will be provided on eBay platform.
4. For ‘Standard Int'l Shipping’, default shipping will be via China Post or Hong kong Post (if package contains battery inside, default shipping will be via Netherlands Post: Hongkong->Netherlands as transit->destination country). For ‘Expedited Int'l Shipping’, default shipping will be via DHL, Fedex, Aramex or EMS, which depend on each specific case. Note that delivery times may vary, especially during peak periods.
1. We have 30 days’ warranty for money back. Refund will be issued after returning item has been received.
2. It’s buyer’s responsibility to contact us about replacement or refund issue within 30 days after defective item has been received; otherwise, we have to reject it. Buyer is responsible for return shipping cost in any cases.
3. All return items must be in original condition, in original boxes, and with all paperwork, parts and accessories; We are not responsible and do not accept any damaged return items. Buyers must pack the return item safely; Please note that your original shipping costs will not be refunded.
We are always aiming to provide you with nice products and services, as nice as we can. So if you meet with any problem or requirement, please don’t hesitate to contact us!
We are always here, just waiting for you.