Introducing 3M Double-Sided Tape, the reliable and versatile adhesive solution for your everyday needs. This high-quality tape is designed to provide a strong, permanent bond on a variety of surfaces, making it perfect for a wide range of applications.
With its clear construction, this double-sided tape is perfect for discreetly mounting photos, posters, and other lightweight items without the need for nails or screws. The tape is easy to use - simply cut to size, apply to the surface, and press firmly to secure the bond.
Whether you're looking to mount decorations for a special occasion, or simply need a reliable adhesive for your crafting or DIY projects, 3M Double-Sided Tape is the perfect choice. So why wait? Add this versatile adhesive tape to your toolkit today and enjoy the convenience and reliability of 3M quality!
PACKAGE:
1 package contains 1 roll of double-sided tape
RECOMMENDATION FOR APPLICATION TAPE:
1. The optimum temperature for applying tapes is +64°F...+77°F (temperature of the tape, working space and mounting surface). Before use, the tape must be kept in the working room conditions for at least a day.
2. The mounting surface must be clean, free from grease and dry. When degreasing, as a cloth, you should use materials that do not leave fibers and threads on the mounting surface.
3. Before applying the tape, it is recommended to apply 3M adhesion promoter to the mounting surface. The primer is applied evenly in a thin layer. After it dries (maximum 5 minutes) - tape is applied. If the interval between primer application and tape application exceeds 30 minutes, then primer application should be repeated.
4. Mount the tape on the product holding it by the ends and not touching the sticky side. First, apply 1-2 cm of adhesive tape to the mounting surface and press down. Gradually apply tape over the entire length of the mounting surface, eliminating tensile force. Stretching force leads to peeling of the adhesive tape from the liner (protective adhesive layer). After applying the tape, roll it with a rubber roller with a force of at least three kilograms.
5. The mounting surface of the body must be prepared (see point 2). Before mounting the product on the body - it is necessary to remove the liner from the adhesive tape. Avoid touching the adhesive layer during installation of the product to the body. After fixing the product on the body - roll with a roller with no effort less than three kilograms in areas of application tape.
6. 100% bonding strength is achieved 72 hours after installation under temperature conditions (see point 1).
7. If necessary, re-glue new tape is used. In this case, the mounting surface must be cleaned from the remnants of the previously applied tape. To separate the glued surfaces, it is necessary to cut the base of the adhesive tape (string, silk thread or fishing line).
1. Helps ensure robust attachment of trim and injection-molded body side moldingsRECOMMENDATION FOR APPLICATION AUTOMOTIVE ADHESION PROMOTER:
SHIPMENT:
1. We will ship your order within 24-48 hours after receiving your verified payment (Excluding Weekends and Public Holidays)
2. All of our packages are sent by registered airmail with tracking. It usually takes about 14 to 28 days to arrive, depends on your location. In holiday seasons, it may take longer time. If you do not receive the goods in 30 days please contact us.
3. All items are sent worldwide.
RETURNS & REFUNDS:
We guarantee our products for 60 days . The defective item will be inspected and if found defective . If you received an incorrect, damaged, defective, or item not as described, contact us for a partial/full refund or replacement on our cost.
FEEDBACK and CONTACT US:
We hope to give you a positive eBay experience by working hard. Please contact us if you have any issues.
If there is no response after contacting us several times, please check your email spam folder.
Please DO NOT leave us neutral or negative feedback with out contacting us first. We will do our best to help you resolve your problems .