Features:
With an increasing number of power output sets, a problem with just one of them can cause the hardware of a computer system to fail or even burn out parts.
Power tester only need to connect the ATX connector on the power supply, you can simply and intuitively know whether the output of power supply is normal.
JW power tester is a powerful power testing equipment.
Can detect ATX, BTX, ITX, TFX computer power supply, and display LCD voltage and PG value.
Can quickly detect the computer power supply, convenient instrument use.
Specification:
100% brand new with high quality
Supports 20-pin and 24-pin ATX ports
SATA ports supported
Supports 4-PIN and 8-pin ports
Support PCI-E video card 6Pin interface
FDD port 6: SUPPORTS ATE hard disk ports
The test voltages are +3.3V, -12V, +5VSB, +12V1,+12V2,+ 5V and PG time values
Material: Plastic
Size: 126x64x18.5mm
Operation Manual:
1. Put the power supply 24PIN and P4, P6 or P8 (the 3 plugs should insert at least one, otherwise +12V2 does not have voltage display) plug into the corresponding location of the power tester.
2. Turn on the power supply power, at the same time "drop" sound two times boot sound, each value were not flicker, indicate the power supply output voltage is normal.
3. If a voltage signal is not detected, or the detected voltage is beyond the normal range, the buzzer will give out a warning for a long time, and the corresponding voltage or PG value will blink. It indicates that the power supply is a fault power.
Package Included:
1 x Power Supply Tester
Note:
The colors may be a little difference for the different monitor display.
Please check as much as possible to make sure the item is the one that you need.
Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)