1. Description


 

This 8x 3G SDI TX&RX BOX are fiber optic serial digital video transmission units that offer the industry's broadest range of digital rates 3Gbps bandwidth while maintaining the signal quality that broadcasters demand. 

The Transmitter and Receiver support 2 discrete Gigabit Ethernet Ports and Dual Power Supply, DC 10V-16V and AC 100-240V. The DC POWER Port is designed for Battery. Also DC and AC Power are backup each other when work.

The Transmitter and Receiver support USB2.0-A data transfer, Key and Mouser for Computer.


The transmitter accepts a 75ohm BNC input and converts it into an optical stream via a standard ST connector.


The transmitter BNC include equalization and reclocker for long lengths of coaxial cable, so you can use them at nearly any point in your SDI chain.


The receiver unit reconverts the uncompressed SDI signal back to BNC output.


The receiver include reclocker and cable driver for long lengths of optical link, use our SFP module, support range 80KM/3Gbps MAX. fiber transfer, so you can use them at nearly any point in your SDI chain.


Both the transmitter and receiver Units include LED indicators to display Power On, SDI signal presence. 


The units use AC 100-240V and DC 10V-16V power supply. This DC Power Supply actually support wide range input DC 5V-24V, 10V-16V is recommended.


2. Feature

  • Supports SMPTE 424M, SMPTE 292M, and SMPTE 259M (C) Serial Digital Video Standards
  • Supports 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 Gbps, and 2.97 Gbps Serial Data Rate Operation
  • Supports DVB-ASI at 270 Mbps
  • Input Cable Equalization 3G:100m, HD-SDI:150m SD-SDI:300m/Belden 1694A
  • Output Cable Reach 3G:100m, HD-SDI:150m SD-SDI:300m/Belden 1694A
  • Supports embedded audio
  • 75ohm BNC input and output port
  • Support  8 Channels Single-Way 3G-SDI Default, Option 5+3 and 6+2 Bidirectional
  • Support Dual Discrete Gigabit Ethernet, and CH1/CH2 auto sensing 10M/100M/1000Mbps bitrate
  • ST Fiber Receptacle
  • Up to 10km distance / Singlemode Fiber default
  • Maximum distance up to 80 km/ Singlemode Fiber
  • Operating Temp.: -20 to 50 Degree Celsius
  • AC 100-240V and DC 10V-16V(DC5521 Connector) power supply



3. Specifications


　DescriptionParameterTest Conditions
BNC



SMPTE Standard
TK WFM2300
BNC75 OHMAgilent System
Date Rate 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 Gbps, and 2.97 GbpsTK WFM2300
StandartSMPTE 424M, SMPTE 292M, and SMPTE 259M (C) ,DVB-ASITK WFM2300
Cable Equalization 3G:100m, HD-SDI:150m SD-SDI:300mBelden 1694A
Cable Out Reach3G:100m, HD-SDI:150m SD-SDI:300mBelden 1694A
Jitter<0.2UI2.97 Gbps
Eye OvershootAmplitude<10%2.97 Gbps
Rise/Fall time130-800psSD,HD,3G Signal

Fiber

SFP Bandwidth3GbpsAgilent System
SFP Support18channel CWDM Band 1270-1610nm　
Fiber ReceptacleST Port　
Fiber Distance10km DefaultSinglemode/G652D
Maxmium Fiber Distance80km Singlemode/G652D/Long Wave Band
Fiber TypeSinglemode　
Others



Input Power100-240V AC and DC10-16V　
Power Consumption35W　
Power Surge ProtectYES　
Operating Temp.-20to 60　
Storage Temp.-40 to 85　
Operating Humidity20-80%　
Two Boxes Weight6KG (3KG/Each Box)　
Dimmension45*483*200mm　
Warranty3 Years Free Warranty　




4. Package List

  • 1U RACK BOX  8X  3G-SDI Single Way Transmitter Default  *1(Option 4+4 and 5+3 and 6+2 Bidirectional Configure)

  • 1U RACK BOX  8X 3G-SDI Single Way Receiver Default*1 (Option 4+4 and 5+3 and 6+2 Bidirectional Configure)

  • 1U RACK BOX Separate Side Ear*4 and Screws

Note:

If you need Bidirectional Configure, please let us know



5. Installation



  1. Connect the provided DC or AC power supplies to the power socket of the transmitter and receiver

  2. Connect SDI cable between the SDI video source and the transmitter BNC input

  3. Connect SDI cable between the receiver BNC output and the SDI video monitor or SDI DVR

  4. Connect ST fiber between the transmitter and the receiver ST Receptacle



6. Notes


 


A. No video output and some one of the three LEDs not lighted

  • Please check the power supply if work

  • please check the video source if work

  • please check the coaxial cable BNCs if all tightened well

  • please check the ST fiber if inserted well


B. There is video display, but video flash

  • please check the video source format if right

  • please check the coaxial cable BNCs if all tightened well

  • please check the ST fiber if inserted well

  • this issue happens often when the ST end face is dirty

  • For long range application, please check the fiber transfer link-budget, if it is too long, the received optical signal is very weak, and may be out of receiver reclocker capacity and fail to recover the useful signals



7. Warranty



Thank you very much for using our products


       The warranty time is three years and life-long maintenance. During this period, any belongs to under normal usage circumstance cause because of the product quality’s problem of breakdown, our company will be responsible for giving free maintain


 

Free maintain won’t be given under the following circumstance:

  • The malfunction and damaged caused by incorrect use, the unauthorized repairs and alteration

  • The damage caused by fire, flood, abnormal voltage, other natural disasters and secondary product damage

  • The product malfunction caused by not in accordance with the user manual operation

  • The malfunction and damaged caused by the other barriers(man-made factors or external device)