Package include :
Specification:
Material :Stainless Steel
Size: Φ80mm
Power: 2.2Kw
Voltage: 220VAC
Current: 8A
Frequency: 0-400Hz
Speed: 10-24000rpm
Cooling: Air-cooled
Runout off: Less than 0.01mm
Precision tapered bore: Less than 0.005mm
Bearing Lubrication: Grease
Collet size: ER20
Bearings: 4Pcs UTE bearing (Steel ball beanings,2 x 7005+ 2 x 7002)
Net Weight: 4.4kg
Power supply interface:Professional aviation Interface, Interface 1234 marked 123 respectively connected to the inverter output end of the (U, V, W), 4 ground wire this interface must be safe ground.
Main application:Wood, Aluminum, Stone, metal, glass, PVC industry
1. Structural features
1) High speed electric main bearing all adopt the Ceramic bearing, axis sets of loading, Improve spindle in the high-speed rotation supporting stiffness and precision grinding.
2) Before driving, rotation of the shaft by hand.Spindle high speed rotation caused by temperature rise, use of cooling liquid circulating system to eliminate.
2. Instructions for use
1) In use, must first connect the cooling water pipe, make spindle connect cooling water and then start.
2) Before driving, turned by hand spindle. If sensory block is not flexible, you should troubleshoot, and then check the direction of rotation of the spindle from the spindle end to see if the match should rotate counterclockwise power wiring should be changed to make it consistent.
3) Before driving, cooling water for grinding workpiece can’t be in the front end of the spindle cover, to prevent the front bearing cover slot inlet burning motor and bearing. the motor must not enter the water, after turned on of the motor, when you live in grinding the workpiece to open the grinding of workpieces coolant. First off the workpiece coolant shutdown, and then close the spindle motor.
3. Maintenance and Service
1) Motorized spindle by medium frequency power supply rated voltage, frequency should be consistent with electric spindle technology parameters, motorized spindle rotational speed can change the frequency to adjust, also directly proportional voltage change.
2) When the spindle is temporarily not in use, should use compressed air to blow the coolant water,to avoid rusting, plug the hole. Spindle surface should be coated with anti rust oil. The shaft end protecting device, placed in dry place.
3) If replacement the spindle of bearings, best professional and technical personnel from the replacement. Use special tools, stator coil does not to be removed.
Technical Paramer
1.Inpute voltage:220V±15%(we also stock 110V and 380V+/-15%,please contact us for item stock)
2.Output voltage:220VAC±15%(analogous to input voltage)
3.Input Frequency:48-63HZ
4.Outpute Frequency:0-400HZ
5.Inpute phase:1 phase or 3 phase
6.Outpute phase:3phase
7.warranty:1 year
(we also stock 4KW 7A, 2.2KW 10A 220-250V, 3KW 220-250V and 380V modol, please contact us for stock )
Basic Connection Diagram
3. 80mm cast aluminium bracket
Shipping
Feedback
1.) we care about our valued customers,and will always try to help you,hope to establish long business with you.
2.) Pls give us the opportunity to resolve any problem, we understand the concerns and frustrations you might have,and will try our best to resolve the issues.
3.) Pls contact us by ebay message or email before leaving any negative feedback or opening any cases on the site,we will help you to resolve the problem,