Package include :
1 x 2.2KW Air-cooled spindle motor (ER20, 220V,400Hz,24000rpm,4 bearing)
1 x 2.2KW VFD Inverter 3HP 220V input and 220V output
1) 2.2KW ER20 Air-cooled Spindle motor Engraving milling Grind
Specification:
Material: Stainless Steel
Size: 80x230 mm(Middle body diameter:80mmxLength:230mm)
Power: 2.2Kw
Voltage: 220VAC
Current: 8.5A
Frequency: 0-400Hz
Speed: 0-24000rpm
Cooling: Air-cooled
Accuracy: 0.003--0.005
Runout off: Less than 0.05mm
Bearing Lubrication: Grease
Collet size: ER20
Bearings: 4 bearings(C7005x2 + C7002x2),P4 class, Angular contact bearings
Power Interface: Optional GX16 waterproof air plug, there are marked 1234,123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground.
Net Weight: 5.2kg
Main application: Wood, Aluminum, Stone, metal, glass, PVC,PCB etc industry
1. Structural features
1) High speed electric main bearing all adopt the C-class high-speed angular contact ball bearing, axis sets of loading, Improve spindle in the high-speed rotation supporting stiffness and precision grinding.
2) Before driving, rotation of the shaft by hand.Spindle high speed rotation caused by temperature rise, use of cooling liquid circulating system to eliminate.
2. Instructions for use
1) In use, must first connect the cooling water pipe, make spindle connect cooling water and then start.
2) Before driving, turned by hand spindle. If sensory block is not flexible, you should troubleshoot, and then check the direction of rotation of the spindle from the spindle end to see if the match should rotate counterclockwise power wiring should be changed to make it consistent.
3) Before driving, cooling water for grinding workpiece can’t be in the front end of the spindle cover, to prevent the front bearing cover slot inlet burning motor and bearing. the motor must not enter the water, after turned on of the motor, when you live in grinding the workpiece to open the grinding of workpieces coolant. First off the workpiece coolant shutdown, and then close the spindle motor.
3. Maintenance and Service
1) Motorized spindle by medium frequency power supply rated voltage, frequency should be consistent with electric spindle technology parameters, motorized spindle rotational speed can change the frequency to adjust, also directly proportional voltage change.
2. 2.2kw Inverter VFD 220V input with 220V output
Product Feature:
1)PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability;
2)Easy PLC function can realize 16 legs of speed and inverter control function;
3)RS485 communication port, adopting standard international MODBUS main circuit control;
4)With extremely strong anti-jamming capability
5)Low output ratting torque0.5HZ-150%, low speed running ability;
6)Carrier adjustable by 16KHZ, completely soundless working environment;
7)Broad voltage working area, normal running in 304V-456V;
8)Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
9)Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;
10)With perfect error protection and short circuit starting protection capability;
Tech parameters:
1.) we care about our valued customers,and will always try to help you,hope to establish long business with you.
2.) Pls give us the opportunity to resolve any problem, we understand the concerns and frustrations you might have,and will try our best to resolve the issues.
3.) Pls contact us by ebay message or email before leaving any negative feedback or opening any cases on the site,we will help you to resolve the problem,