1.Description:
This is a kit parts. You should solder it by yourself.
2.Features:
1>.High sensitivity; 2>.Low power; 3>.Wide operating voltage range; 4>.Low power consumption; 5>.DIY design; 6>.Colorful display; 7>.Mode adjustable;
3.Parameters :
4.Instructions:
Step 1: Complete the installation in the normal way following installation manual and schematic.(Please request separately). Step 2:Connect audio; Step 3:DC 4-9V voltage; Step 4:Adjust working mode Step 5:Test and use.
5.Mode setting:
|
6.Using attention
1>.Please make sure all components in right direction and right place.
2>.Please check whether pseudo/float welding.This is very important .
3>.The soldering iron can't touch the components for a long time, otherwise the components will be damaged because of the high temperature.
4>.It is recommended to use a stable power supply, otherwise it may interfere with the audio signal output.
7.Component list:
NO. |
Component Name |
PCB Marker |
Parameter |
Quantity |
1 |
Metal Film Resistor |
R15 |
10ohm |
1 |
2 |
Metal Film Resistor |
RX1-RX4,RY5-RY12 |
47ohm |
12 |
3 |
Metal Film Resistor |
R13-R14 |
470K |
2 |
4 |
Ceramic Capacitor |
C5 |
0.001uF 102 |
1 |
5 |
Ceramic Capacitor |
C2-C4 |
0.1uF 104 |
3 |
6 |
Electrolytic Capacitor |
C1 |
220uF |
1 |
7 |
Red LED |
D1-D16 |
2*5*7mm |
16 |
8 |
Blue LED |
D17-D32 |
2*5*7mm |
16 |
9 |
Audio Socket |
J2,J3 |
SMD3P |
2 |
10 |
Power Socket |
J1 |
DC3.5 |
1 |
11 |
WD1084 |
U1 |
DIP-16 |
1 |
12 |
Button |
S1 |
6*6*5 |
1 |
13 |
USB to DC Cable |
|
100cm |
1 |
14 |
Audio Cable |
|
100cm |
1 |
15 |
PCB |
ASD-84 |
94*39.5mm |
1 |
Note:Please request install manual and schematic for us;You can finish install by PCB silk screen and component listing.
8.Application:
1>.Electronic teaching
2>.Exercise welding skills
3>.Circuit application
9.Frequency asked questions:
1>.Why can't work?
A :Please make sure all components in right direction and right place and check whether pseudo/float welding.This is very important.
10.Install tools you need preliminary preparation by yourself:
1>. Soldering iron;
2>. Multimeter;
3>. Solder wire;
4>. Iron stand;
5>. Diagonal cutting pliers;
6>. The screwdriver;
7>. Tweezers;
8>. Long nose pliers;
9>. Suction tin;
10>. Cleaning sponge;
11>. Screwdriver set.
If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.
1. We ship to Worldwide.
2. We only ship to confirmed PAYPAL address; your PAYPAL address must match your Shipping address.
3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee.
4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays.
5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service.
6. If you have any problem, please contact us via message, we will reply message within 1-2 working days, please wait for patient.
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "Delivery on time" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the " Ask the seller a question" link on eBay.