About this item

  • CPE820 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.
  • 1000Mpbs digital display wireless bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 433Mbpss.
  • 1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, using 5.8G IEEE 802.11ac single-band wireless transmission technology, with stronger anti-interference ability and better stability
  • Outdoor wireless bridges adopting low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards. Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD), supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatically re-pair when power is restored after a power outage.
  • Point to point wireless bridge built-in 16dBm directional antenna, maximum 27dBm can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM.FCC ID: 2A6EJ-CPE450
 
 

Product Description

 

24V~48V PoE

CPE820 Wireless Bridge

Compared with supporting 24VPoE power supply, this update solves the problem of being incompatible with a 48V PoE injector or standard 48V PoE switch-powered supply.

CPE820 Wireless Bridge

UeeVii CPE820 is a long-distance 5.8G wireless transmission device,it uses wireless communication technology to transmit network data using air as a medium to perform long-distance point-to-point or point-to-multipoint interconnection,the transmission distance can reach up to 3km.

5.8Ghz Wireless Technology

CPE820 Wireless Bridge

Using higher frequency bands in 5GHz WiFi results in less channel congestion. It uses 22 channels and does not interfere with each other, significantly reducing signal congestion compared to the 3 channels at 2.4GHz. So the transmission rate of 5GHz is faster than 2.4GHz.

Perfect for Outdoor Installation

CPE820 Wireless Bridge

You can fix the point-to-point bridge on the bracket (ASIN: B09Y56M6Z9) with metal ties, or you can hang it on the wall; 2 wireless bridges are installed face to face as much as possible, with a clear view. It is recommended to purchase the UeeVii Universal Bridge Bracket.

Network Expansion Solutions

CPE820 Wireless Bridge

Extend the network in the house to your barn, garage, church, warehouse, or even neighbor's house through CPE820 wireless bridge signal transmission. No need to install a new modem and pay for it every month, saving you money.

Application Case Topology Diagram

 

UeeVii provides 5 commonly used network topology diagrams for your reference, point-to-point, point-to-multipoint extended network or surveillance camera, some connections are omitted.

Package List:2*CPE820 Gigabit Bridge,2*Gigabit POE Adapter (24V) ,2*Cat 5e Network Cable,2*Metal Hoop,1*User Manual

 

How to Access and Setting the Wireless Bridge CPE Through Computer Access:

 

  • Step 1. Use a PoE adapter to power the wireless bridge through a network cable. Pay attention to the "PoE" and "LAN" ports marked on the PoE adapter, and power is supplied by POE instead of a DC power interface.
  • Step 2. Use a network cable to connect the CPE "LAN" port, connect the network cable other ends to the PoE Adapter "POE" port, use another network cable to connect to the "LAN" port of the PoE adapter, and connect the other end of the network cable to the computer's "LAN" port.
  • Step 3. Find the number of the Wireless Bridge CPE digital display tube. For example, the number is 1 and the CEP is the A master bridge, then the IP of this CPE is 192.168.255.101; if the CPE is the B slave bridge, then the IP address of the CPE is 192.168.255.201.（There is a table corresponding to a number and IP in the manual）
  • Step 4. Very important step: Modify your computer's IP address, change your computer's IP address to 192.168.255.xxx(192.168.255.xxx cannot be the same as the IP of the CPE), make your computer's IP and the bridge's IP address be on the same network segment so that you can access them. Please refer to the manual to modify the computer IP address step or Google searches how to modify the computer IP address, it is very simple.
  • Step 5. After you modify your computer's IP address, you open the computer browser and enter the IP address of the wireless bridge to access. For example, enter 192.168.255.101 to access.
  • Step 6. Enter the account password "admin/admin" to access, and set it after successful access.

 

Purchase Tips: The installation of this device requires some network knowledge. If you can't install it, please let us know or contact a professional. If the product is damaged or missing accessories, please let us know to reissue a new set. This CPE cannot directly expand the WiFi range for you. If you have any questions, you can free feel to let us know via Amazon or Email, we will quick response and help you solve your questions.

How to find and change CPE820 WiFi SSID and password?

1. Find the WiFi hotspot password of CPE820 , path: Setting-->Wireless--> Name(SSID) and Password.

2. Enter the new SSID and password and save.

DataCaciques