Stainless steel rod 2mm-20mm 1.4571 UNS S31635 round bar round steel solid material
Important: the ends of sawn bars can be sharp/not deburred. The product photos show rods in the manufacturing length. The sawn bars delivered may differ.
- TOP quality at fair prices
- High-quality products made to measure and cut to size
- Competent advice & service
Technical data:
| Brand: | Evek |
| Manufacturer number: | Not applicable |
| Type: | rod, round rod |
| Material: | stainless steel |
| Possible uses: | construction industry; chemical industry; Shipbuilding; Food industry; pipeline construction; Pharmaceutical Industry; |
| Characteristics: | good resistance to corrosion (including intergranular corrosion); suitable for use at temperatures up to 550 °C; good forgeability and excellent weldability; well suited for cold forming; cannot be polished; suitable for low temperatures; |
| Additional Information: | |
| Density: | 8g/cm³ |
| US: | S31635 |
| AISI: | 316Ti |
| Material number: | 1.4571 |
| Thermal conductivity: | 15W/(m K) |
| Electr. Resistance: | 0.75Ω mm²/m |
Description:
- Shipping preparation - 2-3 working days.
- Please look at the FAQ.
Round steel 1.4571 is a stainless austenitic chrome-nickel stainless steel with added molybdenum and stabilized with titanium. The steel grade has good resistance to corrosion. Due to the titanium content, it also offers good resistance to intergranular corrosion both in the welded state and in continuous operation up to 400 °C. The maximum usage temperature is + 550 °C. The steel has good forgeability and excellent weldability.
V4A round steel is well suited for cold forming but cannot be polished. It has good processing properties and is particularly stable in high temperature ranges. The steel can be used at low temperatures down to -50 °C.
Typical uses for round steel 1.4571 are:
- construction industry;
- chemical industry;
- Shipbuilding;
- Food industry;
- pipeline construction;
- Pharmaceutical Industry;
4A round steel impresses with the following properties:
- good resistance to corrosion (including intergranular corrosion);
- suitable for use at temperatures up to 550 °C;
- good forgeability and excellent weldability;
- well suited for cold forming;
- cannot be polished;
- suitable for low temperatures.
