The helmet shell is heat stamp marked "M-176A" denoting production by McCord Radiator Corporation during the early 1950s. A significant amount of what appears to be the original factory textured paint finish remains, though there are a few rust and wear spots present. Also of note, there are two very fine stress fracture cracks that can be noted on the helmet, one on the rear side of the near the seam and one on the right front side just above the brim peak. This is a typical problem for M1 helmets and these cracks do not detract from display in any way. Both chin strap swivels are firmly attached and show no signs of abuse or neglect. The chinstrap appears to be 50s era production and is in good, functional condition overall but some of the metal components have rusted. The helmet liner is complete with both nape strap and sweatband (1967), each is DSA contract stamped, however the nape strap stamp can no longer be read. The suspension is also DSA contract stamped (1966). The exterior OD Green finish shows wear from age and what appears to be honest service as no signs of abuse or neglect are present. There is a small split that can barely be detected on the backside lower right area, it is well detailed in the photographs and does not appear to be worsening nor does it hamper display with a helmet shell. The Mitchell Pattern Camouflage Helmet Cover is in good, clean condition and is well marked. The ink contract stamp appear to place production sometime in 1964 or 1965, however there is much discussion concerning this contract and others as the cover has the "deep cut" long flaps commonly associated with the later part of the  conflict. Both sides of the cover exhibit strong and vibrant colors with no staining or other cosmetic blemishes present. Of note, there is what appears to be a period "field" repair on the top side of the cover. A hole appears to have been patched on the top side of the cover using a piece of another helmet cover. Interestingly enough, the patch is made from a Twill cover and the difference in material is clearly evident. The repair was done properly and is secure, giving the cover a more "Been There" look. The elastic helmet band is a genuine USGI example but does have the glowing "Cat Eye" tabs associated with 80s production. However, the color tone of this band was nearly identical to period-correct Vietnam era examples on hand and it displays nicely with the cover.

Please examine the photographs carefully for the best description of condition.