Stonecare4u Limestone Sealer Enhances Colour Seals and Protects Sample +4 Sizes
Trusted eBay Seller
See Our Reviews£
58.95
PROFESSIONAL PERFORMANCE NATURAL LIMESTONE SEALER
Enhancer Formula – Forms A Long-Lasting, Stain-Resistant Coating Whilst Delicately Accentuating Natural Colours!
Our high-performance sealer is formulated especially for natural limestone surfaces. Likewise, it’s also suitable for other porous natural stones such as sandstone (*exceptions apply) and slate. It offers high-quality stain protection whilst delicately enhancing natural colours & appearance.MAINTENANCE:
To sum up, clean sealed areas with a mild, ph neutral cleaner or a very low concentration of our outdoor cleaner range. Do not use harsh or abrasive cleaning agents as this can have a negative effect on the treated surface. NOT RECOMMENDED FOR USE ON NON-POROUS SURFACES.COVERAGE:
– Up to 15m²/per litre per coat.– Coverage will vary depending on the type of surface application.
KEEP OUT OF THE REACH OF CHILDREN
PRECAUTIONS:
H302: Harmful if swallowed.H315: Causes skin irritation.
H319: Causes serious eye irritation.
P102: Keep out of reach of children.
P262: Do not get in eyes, on the skin, or on clothing.
P280: Wear protective gloves.
P301+330+331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P302+350: IF ON SKIN: Gently wash with plenty of soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P309+311: IF exposed or if you feel unwell: Call a POISON CENTRE or doctor.
P332+313: If skin irritation occurs: Get medical advice.
P337+313: If eye irritation persists: Get medical advice.
HOW TO APPLY:
- Remove any loose debris from the work surface before you start the job and ensure you have adequate safety wear, i.e gloves, suitable protective eyewear, face mask & clothing.
- Leave the surface for a minimum of 72 hours with clear and dry weather to ensure the surface is completely dry, and ready to be sealed.
- Apply the first coat of Essential Limestone Sealer Colour Boost with a low-pressure sprayer, roller, natural fibre brush or sponge. Do not dilute! In addition, any excess sealer must be completely removed from the surface after 20 to 30 minutes.
- Apply a second coat applied approximately 45 to 60 minutes later, for best results.
- Certainly, after application, it is important that the stone surface is kept completely dry through the curing process, which can take up to 72 hours.
*Please note this product is not suitable for Kandla Grey (mid & light grey) sandstone.
Stonecare4u Limestone Sealer Enhances Colour Seals and Protects Sample +4 Sizes
Customer Reviews
More from our store
