MODEL | NOTE |
---|---|
Pico-Sensor-Kit-B | the Sensor Kit only |
Raspberry-Pi-Pico-Sensor-Kit-B | Raspberry Pi Pico H + Sensor Kit |
Raspberry-Pi-Pico-W-Sensor-Kit-B | Raspberry-Pi-Pico-W-M + Sensor Kit |
RP2040-Plus-Pico-Sensor-Kit-B | RP2040-Plus-M + Sensor Kit |
ESP32-S3-Pico-Sensor-Kit-B | ESP32-S3-Pico-M + Sensor Kit |
Pico-Sensor-Kit-B
The pico sensor kit, with IR remote controller, PH2.0 dual-plug 4PIN cable, and PH2.0 4PIN cable.
Raspberry-Pi-Pico-Sensor-Kit-B
On the basis of the Pico-Sensor-Kit-B, it is equipped with Raspberry Pi Pico H and Type A to Micro B USB cable. The Raspberry Pi Pico H is a low-cost, high-performance microcontroller board with flexible digital interfaces. Comes with online development resources and tutorials to help you get started easily.
Raspberry-Pi-Pico-W-Sensor-Kit-B
On the basis of the Pico-Sensor-Kit-B, it is equipped with Raspberry-Pi-Pico-W-M and Type A to Micro B USB cable. Based on Raspberry Pi Pico, Raspberry Pi Pico W comes with a wireless communication module which supports Wi-Fi 4 wireless networks, making it the perfect solution for wireless network control and communication.
RP2040-Plus-Pico-Sensor-Kit-B
On the basis of the Pico-Sensor-Kit-B, it is equipped with RP2040-Plus-M and Type A to Type C USB cable. The RP2040-Plus is based on Pico with onboard 4MB Flash, Type C connector, recharge header, and higher current DC-DC chip, which can meet more application requirements.
ESP32-S3-Pico-Sensor-Kit-B
On the basis of the Pico-Sensor-Kit-B, it is equipped with ESP32-S3-Pico-M and Type A to Type C USB cable. The ESP32-S3-Pico adopts ESP32-S3R2 as the main chip, which is equipped with a dual-core Xtensa 32-bit LX7 processor, with built-in 512 KB SRAM and 2MB PSRAM. Supports 2.4GHz Wi-Fi and Bluetooth LE, suitable for artificial intelligence IoT application development.
Comes With Relevant Resources And Tutorials To Help You Get Started Quickly
① Onboard PH2.0 header for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time.
② Onboard PH2.0 4PIN headers for connecting modules
Adjustable voltage output, after the output voltage exceeds the LED conduction voltage, the LED brightness will increase with voltage
For detecting the ambient light brightness, the output voltage will decrease as the brightness increases
For converting the sound signal into electrical signal, which is amplified through operational amplifier and then inputted to the comparator, providing analog voltage output and digital output respectively. Adjustable output amplitude via potentiometer A and digital interface trigger voltage via potentiometer D.
Onboard passive buzzer, outputs different sounds according to the different frequencies of the electrical signal.
Onboard IRM-H638T/TR2 for receiving infrared remote control signal
Onboard TSAL6400 for transmitting infrared remote control signals, with the infrared light wavelength of 940nm.
Onboard 12×12mm button, for human-computer interaction
Onboard 10mm LED with soft light, for status indication
Onboard SHTC3 chip supports measuring 0 to 100% relative humidity and -40°C to 125°C temperature, with a typical measurement accuracy of ±2% relative humidity and ±0.2°C
Onboard AT24C04 chip for preserving 2Kbit of data when powered down
All Modules Are Connected To Pico Via PCB Castellated Holes, No Soldering Or Wiring Required, Or Can Be Separated To Use Independently
Weight: 0.22 kg