NEW PRODUCT
Black Heathkit SB-200 Ham Radio amplifier. Polycarbonate replacement front panel face.
Applies directly to your current dirty, chipped, flaking or worn aluminum panel.  
Die cut  heavy 10 mil  material which fits perfectly over your old panel. Will cover extra holes, hacks etc. When you install one and get the knobs, meters etc. installed you will be hard pressed to tell that it is not
an original panel.

No cutting, hole making etc. Put it on and you are done. 10 mil thick textured 
flexible  plastic so there is no smoothing out bubbles like a thin overlay. 
 
Silk-screened with a sophisticated industrial process. These are nothing 
like the overlays that are printed by silk screeners who do T-shirts, ink jet printers etc. 
The printing and color actually fuse with the material and will not rub off or smear
regardless of what you do.

 If you are not happy you are free to send it back 
for a full refund. 

Don't be fooled by the reasonable price. I have these made in large quantities 
with state of the art processes and can sell a high quality item at a good price.  
The cost of the custom dies alone are very high but this is a long term business 
and believe that I will recoup my investment over several years. I am very proud 
of my products and give a risk free full money back guarantee. 
You have nothing to lose by purchasing one. 


I have many other restoration parts for this and other Heathkit Ham 
Radio equipment on Ebay. Check out my "other items" to see more. 

Installation notes: The glue is very sticky - It's best to clean the original plate and knock off any loose paint etc with a brush, sandpaper etc. You are only trying to get rid of any loose stuff not sand the plate down. I like to remove one of the two sheets on the back and lightly position the overlay. I like to try to line up a couple of the smaller holes. When you get it where you want it and are sure..... you can then use the palm of your hand, soft cloth etc. to press it tightly to your old panel. 

NOTE: This is the black overlay. I also sell a green overlay 
https://www.ebay.com/itm/262729196930?hash=item3d2be16582:g:9bgAAOSw44BYM2gw&amdata=enc%3AAQAHAAAA4CbIEbI%2Fcq%2Fv1elhj%2BCTDfbJmH6JB721oi9L6fKkyzo7nNJvlnpDhheRXHb1BGCw7qr0Up5FYB9jfY%2BSZ9Ygg8Z%2Fwc4lWWYLNqG1ReQBgYQEja%2BTmRKVXALvkNukYxkAb9HQlIofVI7k86FXjykhxnTcc%2F5koJvi4LApL935lABdu1NW1cXcONqcPl3A6XVmkOWqSSfz9gzvcQD9XlRFqL4l8C4zV9PFCDxgMqOzMFComifAijCNCUHzQY7jsurJ2sze031yKJbWGkXLPspxcbUYGBSKQfwX9DKgBQCJoaqb%7Ctkp%3ABFBMgqHMotNh


Kevin Mahoney
KD0ILM / XV2KM
Mahoneys Radio
Good in QRZ


About Mahoneys Radio
This business was born from the frustration of hitting a dead end
when restoring some of my Heathkit radios, It is one thing to need
a resistor, set of feet, capacitors, paint, tubes etc. but quite another when you 
need a panel or some other parts that may be only available used at a Hamfest
or eBay. There are other hobbyists who provide a good service to us Heathkit
fans with their items and I try not to sell the same types of items. It is a small 
market and we are lucky that there are several people who offer items. 

I felt that I could manufacture some of these things at a reasonable price
if I was willing to make the investment and look to the long term. 

It has taken me a long time to perfect my processes and much trial and error 
but I am now satisfied with my products.   
Keep looking here  for new products. 

Remember that I back my products 100% and if you have any problems I will
be there to take care of you. 
Kevin