Product Description:
The pull-out slide hammer is designed to repair small body damage by hand. It is environmentally friendly and does not damage the original paint. With the dent puller, you can remove the dent yourself and restore your car to its original state. It should be used in combination with glue tongue and other maintenance tools.
The metal puller can be divided into two different T-shaped rods, namely micro puller.
Note that dent elevator is an ideal choice for hail damage repair. Not suitable for vehicles with severe dent damage or repainted as the glue may remove the non factory clear coat.
Material: Alloy
Size: picture as display
Color: Silver
Usage method:
1. Use wire board to confirm dents.
2. Apply hot glue to the tab with a glue gun.
3. Press the puller tab gently into the center of the dent.
4. Using a dent puller, pull and secure.
5. Use glue remover and squeegee to remove glue.
6. Use striking tools and dent hammers to remove protrusions or high spots.
7. Repeat the entire process until dent damage disappears.
The package includes:
1 XT pull + blue 20 piece gasket set
Friendly tips:
1. Shipment: all orders should be carefully packed in an unmarked ordinary package!
2. In general, the product will be carefully transported and there is no direct description of the product outside the package, so you don't have to worry about such personal privacy being exposed.
3. Due to the color of the monitor, the color of the photo may be slightly different from the actual product.
4. Size: (the size is measured by hand, please allow a small difference of 1-2cm, and check whether the size is suitable for you before ordering.) (inch, 1in = 2.54cm)
5. If you have any questions about our products, if you have any questions about our products, please contact us before giving us negative feedback, and we will give you a reply within 24 hours. Thank you. Have a good life!
HOT
