Brass wire hard Ø 0.15-2.5mm EDM wire brass CuZn37 bare

Brass wire hard Ø 0.15-2.5mm EDM wire brass CuZn37 bare

Important: The wire is supplied on a spool, but in certain cases without a spool in a ring (coil). If coil is mandatory for you, ask before ordering.

  • 100% no China imports (pay attention to high price differences)
  • Our products are mostly made in Germany
  • High quality at best prices.
  • TOP rating & service

Technical specifications:

Brand: Evek
Country and Region of Production: Germany
Manufacturer number: Not applicable
Type: wire
Material: Brass
Area of ​​application: Electrical engineering (contact parts, coils and windings); as welding and soldering wire; jewelry making; craft area; Modelling; decorative work;
Characteristics: excellent processing properties: easy to polish and cold-form; good weldability; very good solderability; good corrosion resistance;
Norm classifications:
Material number: 2.0321
EN: CuZn37
Thermal conductivity W/(m*K): 121
electr. Conductivity: 15.5MS/m
Density: 8.4g/cc

Description:

  • Production time - none. Already in stock.
  • Preparation for shipment - 2-3 working days.
  • Look at the FAQ please.

Soft brass is an alloy of copper and zinc. It may also contain small amounts of other alloying elements to achieve beneficial properties. Brass has high corrosion resistance and high tensile strength. CW508L is an alpha alloy. Alpha alloys are ductile and cold workable.

Material CW508L is a high purity brass for cold forming. It is used when high bending properties are required. It can be machined, but only at low speeds and very low feeds.

The soft brass wire has good resistance to water, steam, various salt solutions and many organic liquids. However, under certain conditions (water with high CI content and low carbonate hardness), corrosion in the form of "dezincification" can occur.

The material CW508L is easy to form due to its homogeneous structure. The alloy is therefore suitable for deep drawing, spinning, drawing, stamping and bending without chipping.

Areas of application of the CW508L are:

  • Electrical engineering;
  • craft area;
  • Modelling;
  • decoration work.

Material CW508L is characterized by the following features:

  • excellent processing properties: easy to polish and cold-form;
  • good weldability;
  • very good solderability;
  • good corrosion resistance.

documentation

Data sheet (German)
datasheet
circle

d - outside diameter


Soft brass is an alloy of copper and zinc. It may also contain small amounts of other alloying elements to achieve beneficial properties. Brass has high corrosion resistance and high tensile strength. CW508L is an alpha alloy. Alpha alloys are ductile and cold workable. Material CW508L is a high purity brass for cold forming. It is used when high bending properties are required. It can be machined, but only at low speeds and very low feeds. The soft brass wire has good resistance to water, steam, various salt solutions and many organic liquids. However, under certain conditions (water with high CI content and low carbonate hardness), corrosion in the form of "dezincification" can occur. The material CW508L is easy to form due to its homogeneous structure. The alloy is therefore suitable fo