Happymodel Bassline 2S Micro FPV Racer Drone BNF (ELRS / FRSKY / AFHDS-2A) Bind-N-Fly

Advanced Micro FPV Racer: The Happymodel Bassline is a cutting-edge micro FPV racer drone designed for exhilarating and fast-paced flights, providing thrilling racing experiences in a compact form factor. Multiple Receiver Options: Available in BNF (Bind-N-Fly) edition with your choice of receiver (ELRS, FRSKY, and FLYSKY), making it easy to integrate with your preferred transmitter for seamless control. Impressive Performance: Equipped with powerful brushless motors and efficient electronic speed controllers (ESCs), the Bassline delivers impressive performance, allowing for rapid acceleration, tight turns, and agile maneuvers during flight. FPV Installed: The Bassline includes an integrated FPV systeam ready to go so you can jump right into the action. It features a high-quality camera and video transmitter for real-time live video feed, enabling immersive first-person view flying and capturing captivating aerial footage. Bassline 2S Micro Racer Features: X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX VTX Power up to 400mw Support ELRS V3.0 (Need to upgrade firmware) Powerful EX1103 KV11000 motors CaddxFPV Ant FPV camera Recommend 2S 350mah/450mah/550mah/650mah battery (Not include) Battery tray size: Maximum support for batteries with a width of approximately 17mm and a height of approximately 13mm Bassline 2S Micro Racer Specifications: Brand Name: Happymodel Item Name: Bassline 2S 2inch Micro FPV toothpick drone Wheelbase: 90mm Size: 115mm*115mm*40mm Analog version Weight: 40gram Receiver Options: 2.4G ELRS SPI SPI Frsky D8/D16 SPI Flysky Motor Features: Mode: EX1103 KV11000 Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm Weight(g):3.8g Voltage: 1-2S LiPo Propellers Features: Weight:0.88g Material: PC Pitch:2.3inch Props Dia:52.17mm Center Thickness:5mm Center Hole Dia:1.5mm Flight Controller Features: X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280 X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: ICM20689 or ICM42688P(SPI connection) Mount hole size: 25.5mm*25.5mm Power supply: 1-2S battery input (DC 2.9V-8.7V) Built-in 12A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A Built-in voltage detection Built-in current sensor Onboard 4in1 ESC Features: Power supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Default Factory firmware: Z_H_30_REV16_7.HEX Default protocol: DSHOT300 Support Bluejay firmware Onboard SPI ExpressLRS 2.4GHz Receiver Specifications: Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V2.0 RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn’t flash separately ExpressLRS firmware Could flash FC firmware to support ExpressLRS v3.0 TX module Onboard SPI Frsky D8/D16 receiver Version Specifications: SPI BUS receiver Frsky D8/D16 compatible Compatible Non-EU transmitter D8/D16 model Channels: 8/16 compatible Onboard SPI AFHDS-2A receiver Version Specifications: SPI BUS receiver Protocol: AFHDS-2A Channels: 14ch (AFHDS-2A) Onboard 5.8g OPENVTX Features: Firmware version: OPENVTX Smartaudio v2.1 PIT Mode support RCE Mode support Channels:48ch Transmitting Power: 0/RCE/25mw/100mw/400mw Power supply: DC 5V Current (5v): <650ma (400mw) ANT 1200tvl camera Features: Image Sensor: 1/3″ CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Weight: 2g (N.W.) Package Contents: 1x Happymodel Bassline 2s Micro FPV Racer (Assembled, Bind-N-Fly)

Happymodel Bassline 2S Micro FPV Racer Drone BNF (ELRS / FRSKY / AFHDS-2A) Bind-N-Fly

Multiple Receiver Options: Available in BNF (Bind-N-Fly) edition with your choice of receiver (ELRS, FRSKY, and FLYSKY), making it easy to integrate with your preferred transmitter for seamless control.

Impressive Performance: Equipped with powerful brushless motors and efficient electronic speed controllers (ESCs), the Bassline delivers impressive performance, allowing for rapid acceleration, tight turns, and agile maneuvers during flight.

FPV Installed: The Bassline includes an integrated FPV systeam ready to go so you can jump right into the action. It features a high-quality camera and video transmitter for real-time live video feed, enabling immersive first-person view flying and capturing captivating aerial footage.

Bassline 2S Micro Racer Features:

X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX
VTX Power up to 400mw
Support ELRS V3.0 (Need to upgrade firmware)
Powerful EX1103 KV11000 motors
CaddxFPV Ant FPV camera
Recommend 2S 350mah/450mah/550mah/650mah battery (Not include)
Battery tray size: Maximum support for batteries with a width of approximately 17mm and a height of approximately 13mm

Bassline 2S Micro Racer Specifications:

Brand Name: Happymodel
Item Name: Bassline 2S 2inch Micro FPV toothpick drone
Wheelbase: 90mm
Size: 115mm*115mm*40mm
Analog version Weight: 40gram
Receiver Options:
2.4G ELRS SPI
SPI Frsky D8/D16
SPI Flysky

Motor Features:

Mode: EX1103 KV11000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
Weight(g):3.8g
Voltage: 1-2S LiPo

Propellers Features:

Weight:0.88g
Material: PC
Pitch:2.3inch
Props Dia:52.17mm
Center Thickness:5mm
Center Hole Dia:1.5mm

Flight Controller Features:

X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
X12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FS
X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM20689 or ICM42688P(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
Built-in voltage detection
Built-in current sensor