NO RADIO <<<>>>. Tall STACKER STAND with TWO Side Attach KN5 5M Knobs and with TALL Long side extension add on extension brackets plus Long Base Bracket Slider Brackets for more tilt up. <<<
>>> Please note two devices must be same width or near same width. I send fender washers as spacers if you need to use on a device that’s a bit narrow compared to your wider device radio or scanner etc. <<<
>>> As with most of my items if you order a 2nd or 3rd unit at the same time for yourself or with a Buddy share the shipping cost order the order will ship for the one ship fee !!! A real potential cost savings. !!!<<<
>>>>I do not combined orders across listings.<<<
>>> Base Stand includes my base & side slider brackets shown as parts in photos or if you have the one piece Uniden base bracket it cannbe used with my side brackets on this 3Lb base !!!<<<
>>>Note base slider brackets are now wider and taller than photos. <<< Sent with 8/32 Truss Screws & nuts !<<<
>>>Tall Extension Slider Brackets now have QR slots !
To use QR point them up or not point them down !<<<
This Steel Stand Base can be used to mount your scanner more toward vertical or to stack above a speaker or by buying online two more KN5 5M Side Attach Knobs you can STACK TWO !!! Uniden Scanners. There are several online stores that offer extra KN5 5M side attach knobs !!! <<< !!!
<<<>>> For SDS200 Scanner and other radios needing 5M KNOBS !!!>>>No Radio <<<Now Knobs supplied are with larger knob heads as shown in photos without Transceiver mounted. <<<
>>>Custom made by me aka Design Services Custom Products in Idaho USA as a single source for this : approx 5” x 8” <<<
>>> 3Lb Base Stand with Quick Release Adjustable brackets on my Universal 3Lb Base 6Th Generation All Steel SUPERBLOCK and Adjustable Quick Release QR Bracket & 5M Knobs. <<<
>>>I also separately offer : Hand microphone bracket for 3Lb Base. <<<
>>>For Uniden and other radios with 5M side mounting ports. <<<
>>>QR Adjustable Brackets and 6th generation 3Lb Base Only. Please note a Chassis Bracket is also called a TRUNNION Bracket. <<<
>>>No Radio or other device included. <<<
>>>To USA units are shipped USPS Priority Padded Flat Rate Envelope with a Carton inside with unit well padded. <>>><<<>>>
>>>Multiple *** Base / Stand Kit Units Ship Same / One FEE. USPS Medium *** Flat Rate Carton will be used for +++ Unit orders at same fee. For Intl Units are shipped Ebay Economy Intl. <<<
>>>Maximum Bracket Width 10.25” or 10&1/4” .
Minimum Bracket Width 4.75” or 4&3/4” .<<<
>>>Slide Slotted Brackets can actually be reversed and attached to multiple mounting holes along the centerline to allow adjustment closer than the 4.75” listed above !!!<<<
>>>Maximum Knob Height at Knob Stud Center 2.125 or 2&1/8” .<<<
>>>Minimum Knob Height at Knob Stud Center .625” or 5/8” . <<>>
>>>NO DEVICE ! This is for a New Design 3Lb Base and 14* piece Hardware and Quick Release Adjustable Bracket and Side Bracket to Device Attachment KNOBS* which are by far the most common size for Icom radios and both sides and back of device attachment. <<<
>>>Please Note this is a new listing and to date I’ve sold over 125 of these very successful 3Lb Universal Bases across several listings. <<<
>>>Not 3D Printed Plastic but 3 POUNDS of SOLID STEEL in Baked on Triple Coat Gloss Black on 4 Ea 3M Anti-Skid Feet. <<<
>>>This 3Lb Versatile Platform includes a multi part hardware assortment of screws, nuts, wing-nuts, and is
Now with New and Improved Base that’s 1” wider for Greater Stability!!!<<<
>>>This Heavy Duty PEDESTAL BASE is now wider Front To Back @ 8” Long by 5” Wide.<<><>>
>>>No Scanner or Radios this listing is for the Base , Adjustable Quick Release Bracket , and End / Attach Bracket to Device Knobs !!! <<<
>>> LOOK >>>This Pedestal has Two sets of holes for attachment screws with centers at 5&7/8” and 2.5” center to center distance for each pair of holes. Plus this 6Th Generation Universal version 3Lb Base has many added holes for Bracket attachment in different positions and also other item adds. <<<