Cutting Diameter (DC) | 5/8″ | Corner Chamfer Width (CHW) | 0.024″ |
Connection Diameter Machine Side (DCONMS) | 5/8″ | Ramping Angle Maximum (RMPX) | 5 Degrees |
Depth of Cut Maximum (APMX) | 1-1/4″ | Grade | IC900 |
Overall Length (OAL) | 3-1/2″ | Tool Type | Solid carbide center cutting endmills 90 Degrees |
Cutting Edge Material | Carbide | Maximum Feed per Tooth (fz(max)) | 0.004 ″/tooth |
Coating | AlTiN | Minimum Feed per Tooth (fz(min)) | 0.002 ″/tooth |
Flute Count (NOF) | 4 | Coolant Supply Property (CSP) | External |
Flute Helix Angle (FHA) | 45 Degrees | Body Material | Carbide |
Shank Type | Weldon | Decimal Equivalent | 0.625″ |
End Shape | Chamfer | Measurement Type | Inch |
Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Hi Temp Alloys | | Connection Code Machine Side (CCMS) | Weldon |
Application | Finishing | Roughing | Counter Boring | Drill Mill | Helical Interpolation | Plunging & Recessing | Rampdown | Shouldering | Slotting | | |