Uni-Solar PVL-68 68W 12V Flexible Amorphous Solar Panel - Solder Points No Cable with Sticky Backing
These panels are New Open Box. They have the bottom solder points for connections down through the roof. They are 9 feet long. If you would like the cables that you add to come up through the top of the panel it is possible by scraping off the top sheet above the solder points and connecting the wire through from the top. Then caulk the bottom solder points to insulate. We include a DIY Junction Box with 18-Inch connector cables FREE with every panel sold. You can just remove and use the wires or if you solder a short 4" wire into solder point you can then glue the J-box to add cables.
Previous customers have reported installing these panels on their corrugated metal roofs by attaching 18" x 2" metal strips every few feet on the sticky backing, leaving the white covering for the sticky backing intact where the metal strips are not present (saving the sticky material for other projects in case the panel is moved later). They then drove self-tapping screws through the protruding ends of the metal strips onto their metal roof, sealed with a proper caulk. This allowed them to install the panel with its built-in sticky backing and yet keep the installation non-permanent.
Electrical Stats:
Physical Stats:
Electrical Connectors:
Features:
Condition: New
New Open Box. This panel has bottom-facing solder points for connections down through a roof. We include a DIY Junction Box with 18-Inch connector cables with every panel sold, but other components may be needed depending on the desired setup, such as short wires to connect the solder points to the j-box, and/or a sealant to connect the j-box securely to the panel. They are 9 feet long by 15.5 inches wide. Please view our photo set and contact us if you have any questions.
We ship by most standard carriers and also offer local pick-up at our warehouse in Ventura, CA. Please be sure to include a street address (not a PO Box) for any method other that US Postal Service.
Large and heavy items ship by palletized freight and are delivered to the nearest truck freight terminal (for US lower 48 orders) or the nearest ocean freight seaport terminal (for International orders). Buyer must collect the goods at the terminal or make arrangements for onward delivery from that location.
International shipping rates do not include taxes, tariffs, customs, or duties unless otherwise noted.
If you do not see a rate in this listing please contact us and provide your ship to City and State or Country and we'll research it for you. All items are shipped from our warehouse in Ventura, CA USA.
???????
We have IMMEDIATE PAYMENT required on many of our listings, so if you'd like to make an OFFER on this item and you do not see a MAKE OFFER button, please use the CONTACT SELLER link at top right under our username. ???????
30-DAY SATISFACTION GUARANTEE -Contact us with any questions or concerns and we will make it right. Our customers are our highest priority. If you are not completely satisfied with your purchase, please contact us within 30 days of your purchase and we will refund 100% of your purchase price. Returns must include all original undamaged items, in resalable condition with all original packaging (including manuals, and accessories). Media, Books, and Software are non-refundable. Shipping and Handling fees are non-refundable and the buyer is responsible for return item shipping costs.
Guaranteed
Uni-Solar PVL-68 68W 12V Flexible Amorphous Solar Panel - Solder Points No Cable with Sticky Backing
These panels are New Open Box. They have the bottom solder points for connections down through the roof. They are 9 feet long. If you would like the cables that you add to come up through the top of the panel it is possible by scraping off the top sheet above the solder points and connecting the wire through from the top. Then caulk the bottom solder points to insulate. We include a DIY Junction Box with 18-Inch connector cables FREE with every panel sold. You can just remove and use the wires or if you solder a short 4" wire into solder point you can then glue the J-box to add cables.
Previous customers have reported installing these panels on their corrugated metal roofs by attaching 18" x 2" metal strips every few feet on the sticky backing, leaving the white covering for the sticky backing intact where the metal strips are not present (saving the sticky material for other projects in case the panel is moved later). They then drove self-tapping screws through the protruding ends of the metal strips onto their metal roof, sealed with a proper caulk. This allowed them to install the panel with its built-in sticky backing and yet keep the installation non-permanent.
Electrical Stats:
Physical Stats:
Electrical Connectors:
Features:
Condition: New
New Open Box. This panel has bottom-facing solder points for connections down through a roof. We include a DIY Junction Box with 18-Inch connector cables with every panel sold, but other components may be needed depending on the desired setup, such as short wires to connect the solder points to the j-box, and/or a sealant to connect the j-box securely to the panel. They are 9 feet long by 15.5 inches wide. Please view our photo set and contact us if you have any questions.
We have IMMEDIATE PAYMENT required on many of our listings, so if you'd like to make an OFFER on this item and you do not see a MAKE OFFER button, please use the CONTACT SELLER link at top right under our username. ???????
30-DAY SATISFACTION GUARANTEE -Contact us with any questions or concerns and we will make it right. Our customers are our highest priority. If you are not completely satisfied with your purchase, please contact us within 30 days of your purchase and we will refund 100% of your purchase price. Returns must include all original undamaged items, in resalable condition with all original packaging (including manuals, and accessories). Media, Books, and Software are non-refundable. Shipping and Handling fees are non-refundable and the buyer is responsible for return item shipping costs.
We ship by most standard carriers and also offer local pick-up at our warehouse in Ventura, CA. Please be sure to include a street address (not a PO Box) for any method other that US Postal Service.
Large and heavy items ship by palletized freight and are delivered to the nearest truck freight terminal (for US lower 49 orders) or the nearest ocean freight seaport terminal (for International orders). Buyer must collect the goods at the terminal or make arrangements for onward delivery from that location.
International shipping rates do not include taxes, tariffs, customs, or duties unless otherwise noted.
If you do not see a rate in this listing please contact us and provide your ship to City and State or Country and we'll research it for you. All items are shipped from our warehouse in Ventura, CA USA.
???????
Guaranteed
On Apr 14, 2024 at 11:38:26 PDT, seller added the following information: