💡 Descriptions:
Increased range is desirable in any communication application, and it’s particularly important in home automation environments.
Therefor, creating the Bluetooth Network system is the the future of smart home technology.
Mesh Networking system, Greater Range support up to 64 Bluetooth groups
You can add the devices to different groups, control a single light or a group bulbs, it is depends on your preference.
Notice: When Configuring the Smart Bridge, it works with 2.4GWi-Fi Network(5G Hz Wi-Fi Network is not supported)
Cable Length : double 0.5m , Cable length between 2 Connected Neighbouring Lights :1m
Model:Φ30MM RGB |
Lighting Colors:RGB |
Voltage:DC12V |
Rate Output Power: |
RGB : 0.1W(Single-color)/0.5W(Multi-color) |
item Colors:Silver |
Beam angle:120° |
LED Chips:SMD 5050 |
Chips :1pcs |
Hole size:25mm |
IP Rating:IP65 |
Demension:Φ30*H26mm |
APP / Remote Control: Scan the QR Code on the Wifi Led Controller to Install the "FVTLED" APP,You can Adjust Any Color You Like by the APP.Besides,You can also Use the Remote Control,Freely Change the Color and Brightness(15 Meters or Less)
How to use the wifi Controller:
1.Download the FVTLED app
2. Open your Wi-Fi phone network and connect the Wi-Fi controller device named LEDnet *****
3. Open the app, register your account with your own e-mail address. After the registration account was successful, add your device.
4. Connect your home Wi-Fi network, enter the password of your home Wi-Fi network, when the connection is successful,
your Wi-Fi controller is connected to your Wi-Fi network.
5. After successfully connecting to your home network, you can use the app to control the LED recessed floor lights,
as long as someone downloads APP and successfully connected to the network, they can use the LED recessed floor lights
6.Support for WAN / LAN
7.Support for Amazo Alexa , Google Home , IFTTT
How to connect to Google Assistant?
Step 1: Creating your Magic Home/FVTLED cloud account
In order to control your smart light with the Google Assistant or control them remotely, you need to create a Magic Home/FVTLED cloud account and signed in.
Step 2: Add your light and modify the name
make sure there's at least one smart light in device list, and enabled your lights for remote control.
In the "Home" page, long press on the light you wish to rename.
Step 3: Login your Google account in Google Home App and add Home Control Action.
1. Turn on Google Home App and login your Google account, and then click the red box in the upper left corner of Google Home, enter "Assistant settings" and select "Home Control".
2. Add device in Home Control and search and Select "Magic Home WiFi".
Step 4: Login with your Magic Home/FVTLED app account
Enter your app account and password to finish the account linking. (using your Magic Home/FVTLED cloud account you used in step 1).
Your device should be listed in Home Control device list now.
Step 5: Let‘s Control decking lights by voice commands.
💡 Package with: (This Controller also can work with Bluetooth)
1 Light whout any Fittings
10 lights+Power+WIFI Controller
10 x LED Deck Lights
1 x Power Supply
1 x WIFI Controller+Remote Contol
20 lights+Power+WIFI Controller
20 x LED Deck Lights
1 x Power Supply
1 x WIFI Controller +Remote Contol
30 lights+Power+WIFI Controller
30 x LED Deck Lights
1 x Power Supply
1 x WIFI Controller +Remote Contol
40 lights+2*Power+2*Controller
40 x LED Deck Lights
2 x Power Supply
2 x WIFI Controller +Remote Contol
50 lights+2*Power+2*Controller
50 x LED Deck Lights
2 x Power Supply
2 x WIFI Controller +Remote Contol
60 lights+2*Power+2*Controller
60 x LED Deck Lights
2 x Power Supply
2 x WIFI Controller +Remote Contol
💡 Applications:
1. Outdoor and indoor decoration;2. Dance floor decoration;3. Garden illumination;4. Hotel lobby or shopping mall decoration, etc.
💡 Please read the manual before using it. If you have any question or problem for setup or reset, please check the FAQ in the app or contact us through eBay Message. We are readily available for technical support.