For sale original Mercedes Xentry Diagnosis VCI (made by BOSCH)
Mercedes part number: 6511 201 799
Bosch part number: 1 699 200 324
• Comes with OBD2 cable, USB cable
• software is not included
• Supports newest Mercedes diagnostics W206, W254, W223
• Perfect for Mercedes COMAND NTG5, NTG5s1, NTG5s2, NTG5.5, NTG6, NTG7 flashing/programming
• Works with these diagnostic software: Vediamo, Monaco DTS, Xentry Openshell, XENTRY Flash (XENTRY Diagnosis, XENTRY DAS), SCN coding
• Comes with 12 months warranty
Any questions - please contact us
Property | Value/range |
Host interface | |
Wired | High speed USB 2.0 |
Wireless WiFi USB flash drive | 802.11b/g/n |
Processor system | |
Microprocessor | Intel MX6 Solo |
Clock rate | 800 MHz |
RAM | 512 MB DDR3 RAM |
RON | 512 MB Flash |
Mass storage (opt.) | USB memory stick |
User interface | |
LEDs | 5 status LEDs |
Signal tone beeper | Acoustic signal tone |
Power supply | |
From the vehicle battery via the diagnosis connection cable or via a connected USB connection cable. Important: Diagnostic socket of the vehicle must be secured with a fuse of maximum 6 A/32 V. | OBD: 8 to 28 VDC; 750 mA USB: 5 VDC; 700 mA |
Mechanical properties | |
Dimensions | 168 x 115 x 45 mm |
Weight | 0.41 kg |
Operating temperature | -20 °C – +60 °C |
Storage temperature | -40 °C – +80 °C |
Humidity at 25 °C | 30% – 95% |
Maximum operating height | 4,000 m |
Protection class when diagnosis connection cable not plugged in | IP 30 |
Protection class when diagnosis connection cable screw-fitted to IEC60529 | IP 54; category 2 |
Degree of soiling | 2 |
Diagnosis connection cable | |
J1962 (ISO 15031-3) | 26-pin; rating 28 V; CAT O |