LAUNCH X431 X-PROG 3 Car Key Programmer Immobilizer Key programmer tool Smart Keys Remote For X431 V PLUS X431 PROS X431 PRO3S+
Introduction:
X431 X-PROG 3 Vehicle Immobilizer Programmer Key programmer tool, 2021 Year newly launched X-431 G upgraded Immobilizer Programmer product . It is a powerful chip reading,matching and writing programmer.
It is suitable for professional users in the automotive electronics industry/locksmith/maintenance shop.
HIGHLIGHTS
1. It can be used with a variety of LAUNCH X-431 products, no need to bind, flexible to use, and a wide range of adaptations
2. Integrated multi-function module, one machine with multiple functions, high cost performance
3. Powerful functions, support Mercedes-Benz Infrared keys reading and writing, BMW engine ISN code reading, BENCH mode reading engine and other functions and more
4. Reading and writing data is fast and accurate
X-PROG 3 Working Car brands:
Volkswagen, Audi, Skoda, Seat, BMW, Mercedes-Benz, Toyota, and more models continue to be updated...
X-PROG 3 Working Vehicle systems:
Engine system, automatic transmission, instrument system, CAS, body system, lock system, etc.
X-PROG 3 Powerful Functions List:
EEPROM read and write
Key read and write
special key generation
on-board MCU read and write
BMW engine ISN code reading
Benz key
BMW CAS4+, FEM chip read and write
Key Simulator
Audi 5th generation steering column chip reading and writing
Volkswagen's fourth-generation meters are lost
OBD reads MED17 engine
Read engine in BENCH mode
Volkswagen fourth-generation UDS engine replacement
Boot mode read engine
Volkswagen MQB engine, gearbox, steering column lock replacement
Volkswagen four-generation free accounts are all lost
Mercedes-Benz engine gearbox wipe empty function
Transmission data reading
Working With LAUNCH Products here(could not work alone)
Apply for launch x431 :X431 DIAUN V/ X431 PO MINI/X431 V/V+/PRO3S+/PAD V /PAD III etc.
X-PROG 3 can be arbitrarily matched with a variety of X -431 product use, no need to bind, flexible use, stable and reliable product.
Working ECU MCU : (over 1000kinds model,Updating.....)
Atmel NSC
Fujitsu Philips
Infineon Renesas M16
MC68HC05 Renesas M32
MC68HC08 Renesas M32R
MC68HC11 Renesas R32C
MC68HC12 Renesas R8C
MediaTek Renesas V850 SPI
MicroChip Renesas V850 UART
Nordic Samsung
ST SiLabs
Working EEPROM : (over 1000kinds model,Updating.....)
4Wire GI Numonyx SST
AdestoGigaDeviceOKI ST
AKM Grundig ONSemi Toshiba
Altera HOLTEK Other Winbond
Amic Hynix PCTXicor
Atmel I2C PhilipsxUSSR
BOSCH ITT PioneerYMC
Catalyst KHIC PMC Spansion
Chingis Macronix Ramtron SPI
Dallas/Maxim MicroChip Rohm NEC
EON Micron Samsung NSC
ESMT MicroWire Seiko Ford
EXEL Mitsubishi Siemens Fujitsu
Fairchild Motorola Sony
X-PROG3 parameter
Interface: DB26, DB15
Input voltage: DC12V
Input current: 500mA
Working temperature: 0-50℃
Storage temperature: -20-70℃
X-PROG3 Dtails&Functions:
1. Car key slot --------- Place the car key to perform the key matching function
2.DB26 --------- Connect to various anti-theft wiring harnesses, such as the data collection line for the fourth generation of instrument keys, etc.
3. Mercedes-Benz key infrared slot --------- Place the Mercedes-Benz infrared key to perform the key matching function
4. Car key chip hole --------- Place the key chip to perform key matching
5. Status indicator --------- Power indicator
6.DIY slot --------- Connect the anti-theft ECU pin through the cable to read and write data
7. Locker Install chip burning socket --------- Complete EEPROM or MCU data read and write operations
8.DC12V power supply --------- Connect DC12 power supply
9.DB15 --------- Connect the main wiring
X-PROG3 Packing list:
• Main unit
• Power adaptor
• Main diagnostic cable
• The fourth-generation data acquisition cable
• The fourth-generation of EEPROM data acquisition cable(without
dismantling dashboard)
• BENCH mode cable
• MCU converter V1
• MCU converter V2
• MCU cable with multiple leads
• EEPROM chip adaptor
• Benz infrared analog acquisition key
How to use X-PROG3 to read and write data?
Method 1: use main cable to connect car OBD2 16pin interface, and X-PROG3,with LAUNCH X431 Tablet to do key matching, data reading and writing, etc.
Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host
Shipping
Order will be shipped within 1 business day after payment confirmed.
We have warehouse in USA,UK,HongKong,Australia,Russian,Germany and China warehouse.
From our US/UK/RU/DE/AU warehouse via USPS UPS or DHL eCommerce shipping
Delivery time varies from 2 to 6 business days.
From our China warehouse via UPS DHL or Fedex
Delivery time varies from 5-12 business days.
We will ship according to your payment address.
Please make sure it is correct and include phone number for delivery.
If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
Please include your special requests in eBay note if there is any.
We are authorize distributor, our all items are 100% original and Our devices have warranty,
12 months free repair for the devices.
3 months for the accessories.
Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us in 30 days and keep it unused.
We will instruct you on how to return and get refund or replacement.
If after 30 days, or the item has been used, we have the right to decline your claim.
Items should be returned on buyers' cost for repair or replacement.
Who We Are?
We are specialized dealer of On-Board Diagnostic tools and automotive electronics
for more than 10 years.
We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands,
and more brands will be show in our store in near future.
What Do We Have?
We have office and warehouse in Australia and US to ensure fast shipment and after-sale service.
We have more than 50 employees devoting to customer satisfaction.
Terms of tax:
We are not responsible for buyer's local taxes, please consult your local Customs for tax details.
Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.
Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.
We will reply in 24 business hours.
Business time: GMT8 (9:00-18:00) from Monday to Friday.