Princess Barbie head/silhouette is 8w x 9h approx
its a large iron on and perfect for tees, bags and more!
All clear hot fix crystals.
Can be in spangles instead of rhinestones! Message me!
Or add to notes when checking out.
RHINESTONE
INSTRUCTIONS:
1.
Preheat iron to cotton setting. Heat
Press 320
2. Put cardboard in between shirt so the rhinestone glue doesn’t go through
to the back of the shirt. OR the
parchment paper sent with this order
3.
Peel off textured backing from the design (stones should stick to the clear
plastic sheet). If any stones have shifted out of place, put them back in place
using tweezers.
4.
Place plastic sheet, stone side down on fabric and press into place with hand.
The clear plastic sheet should stick to the fabric.
5.
Place iron over design area and apply steady pressure for 15 seconds - DO NOT
MOVE IRON AROUND AS STONES MAY SHIFT –
6. Turn Garment WRONG SIDE OUT and Place iron
over design area for another 15 seconds and repeat.
7.
Set aside and allow to cool for 3 to 5 minutes.
8.
Turn fabric to right side out. Slowly and carefully peel the clear plastic
sheet away from the fabric. If all stones are not sticking, you may re-iron on
the opposite side of the fabric again.
*** These hot fix and iron on rhinestones and
transfers are not intended for use by or near small children. Please do not
allow children access to these products.
*****Wear To Start is NOT
responsible for garments for any reason. Look over carefully prior to ironing.
Make sure the back of the transfer is free of plastic or debris. Use tweezers
to remove any unwanted materials that might have been missed from the transfer,
or to put the rhinestone back in place if they moved from original location on
the carrier.****