CNC Machine Tool Guide fit for PTFE Turcite Special A 650g+ B 350g Glue 1set
The bonding site needs to be clean and dust-free. The soft tape is treated with sodium naphthalene on one side. The dark brown side is the bonding surface, and the green side is the working surface. The remaining soft tape and special glue should be kept in moisture-proof and light-proof storage. In order to improve the bonding strength,
Please remove rust and oil on the bonding surface of the metal guide rail before operation, and do a good job of cleaning.
The special glue can be used as needed. It can be used after weighing and mixing according to the ratio of A:B=2:1. It can be applied evenly. The glue layer should not be too thick or too thin, and should be controlled between 0.08-0.12mm.
After pasting, please cure at room temperature for about 24 hours.
A: 650g, B: 350g,
Shipping Quantity: A + B (1 set)
Notes:
We will check the products carefully before shipping.
After receiving the item, if you have any questions, please write to me, please do not leave negative feedback and open CASE, I will try my best to help you solve the problem, as a seller, we will be responsible for everything.
Contact us
If you need any type of item, please contact us via eBay messaging service. We will respond to you very promptly. At our store, we make every effort to ensure that every buyer's experience is as valuable and enjoyable as possible.
You can buy with confidence knowing you're getting a worry-free deal!