Headphone Plug extraction tool - Headphone Extraction Tool - Headphone Jack Extraction Tool - Headphone Removal tool - Headphone Jack RemoverShape and Size: 4 Tubes, short one 20mm, long one 30mm, 3.5mm in diameter allMeterial: Stainless Steel TubeProcessing method: Laser Cutting and Surface PolishingPackage Contents:2 × 20mm*3.5mm diameter tube headphone plug extraction tool2 × 30mm*3.5mm diameter tube headphone plug extraction tool1 × 3 in 1 mini Screwdriver for glasses and watches as giftWeight: 1 OZHOW TO USE:1. This headphone extraction tool kit includes one short and one long laser cutting mini stainless steel pipe. These two stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack.2. Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table.3. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out.4. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above.GUARANTEES:This set of headphone removal tool is considered a SINGLE-USE tool. But we offer a 100% satisfaction guarantee. If you are not satisfied with our tool kit, please take a picture and contact us. You will get a FULL REFUND.