Brand new direct replacement 7-coil stator with 5 wires for two stroke engines
3-pin plug , 2 loose wires
2 bolt holes, 103mm bolt hole spacing
All products shipped are tested.
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Can-Am DS 50 2-Stroke -- 2002-2006
78201600
0450522
0450521
01-ETON-50-70-90
AP8206462
AP8212701
0450523
0450998
0451000
3KJ-85560-00-00
3ES-85560-01-00
A31100116000
Dimensions :
Interior diameter : 79 mm
Exterior diameter : 27 mm
Thickness : 13 mm
Length of wires stator to grommet : 79 mm
Length of wires grommet to plug : 200 mm
Length of pickup coil's wire to grommet : 100 mm
Other specifications :
Number of wires : 5
Number of plugs : 3
Number of pins : 5
Wire to wire resistance :
Alternator : Red to White = 0.4 ohms +/-20%
Pickup : Pink to Black = 500 ohms +/-20%
Source : Black/Red to Black = 300 ohms +/-20%
Before installing your new stator
Our stator may use a different wire color code than your original. All of the wires are installed in the correct order; please do not change any of the wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. When bolting stator in, always use locking compound.
Our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
find parts for :