To make your purchase as simple and easy as possible, please read ALL information provided below and ask any and all questions prior to bidding.
Item Description: Up for auction is a 3D resin printed 1/25 scale 1965 Ford Falcon Station Wagon body as shown, made using ABS-like UV cured liquid resin. As with most 3D printed large surfaces, this has a matte finish and a grainy/layered feel as shown so prep work is required for a great finish, but the effort is well worth it to have a body not easily found otherwise. The layered or ringing finish is predominantly seen on the top surfaces (hood, roof, deck) due to the printed layer thickness set to .05mm (.0019") which provides the best print quality at an affordable price. This body was printed to an overall length of 178.33mm without the bumpers installed, an overall width of 72.8mm and an overall height of 45.44mm, but please verify these dimensions to be acceptable as-is and will work for your specific project PRIOR to purchasing.3D printed resin typically cures to a hard form which makes it more brittle to work with. I have started using the ABS-like resin to combat this, however care and patience should still be used when working with this material. Please research and understand 3D UV cured resin products to know exactly what to expect and the best ways to work with, prepare, assemble and paint it.Design by @nahuelcustoms
This body is not intended to be completed with any specific kit. It is intended to be used in a kit-bash build.AGAIN, this body requires work to smooth and prep for paint!!!