PAINTMASTER - POLYURETHANE PRIMER & FLOOR SEALER - CONCRETE PRIMER
Approximately Touch Dry In 4 - 6 hours
Colour (clear)
Heavy Duty and Long Lasting
High durability and is easy to clean
For use with
Floormaster polyurethane floor paint
DESCRIPTION
A single pack low viscosity penetrating first coat primer designed to soak into the substrate, providing excellent adhesion of subsequent topcoats.
This product will reduce any risk of delamination due to poor penetration of heavy top coats
suitable for use with floormaster polyurethane floor paint and to be used on bare or painted concrete
colour - clear sealer
SPREADING RATE (Coverage)
Approximately 6-10 square metres per litre
DRYING TIME
Under normal circumstances, it should be touch dry in 4-6 hours if well ventilated and conditions are dry.
APPLICATION
Brush, Roller, or Sprayer.
Make Sure Surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
STORAGE PRECAUTIONS
Store away from heat and naked flames. Secure lid between uses to prevent paint hardening.
THINNERS
White spirit or turpentine substitute can be used for thinning.
SURFACE PREPARATION
Ensure all surfaces are sound and clean, free from algae and moss.
Ensure surface is completely dry and free from condensation and damp.
Remove any loose or flaking paint.
PLEASE NOTE DUE TO THE SIZE AND WEIGHT OF THESE TINS THEY DO OFTEN GET DENTED WHILE IN TRANSIT THIS DOES NOT AFFECT THE CONTENTS INSIDE AND THEREFORE DO NOT OFFER PARTIAL OR FULL REFUNDS
FOR DENTED TINS PLEASE BEAR THIS IN MIND WHEN PURCHASING THANKS
ANY QUESTIONS PLEASE CALL 07929525648