Diagnostic Laptop & Interface for Citroen Peugeot V9.149

PP2000 lexia 3 Diagbox V9.149 Citroen Peugeot Diagnostic Laptop and REV C Interface

Used Dell or Lenovo Laptop Intel® Core™2 Duo Processor or better

Good life battery and charger, all fully tested

Windows 7 service pack 1 fully updated with Microsoft

The Latest 2023 REV C Version interface with the latest Original Diagbox V4.5.0 firmware installed

Latest 2023 v9.149 No one sells this up to date Diagbox with latest version of PP2000 and Lexia

PP2000 is v800.25 and Lexia v700.24

This V4.5.0 is the latest 2023 version no one sells interfaces with this firmware installed 

Note : You will not have any online access

I test these laptops on at least two Peugeot and/or Citroen cars/vans, other sellers will not do this

I use this software myself so can help out if needed, ask other sellers if they use this software

I'm not the cheapest but I am the best

These work the same as the Original dealer interface at a fraction of the price

Fully tested on many Peugeot or Citroen cars

A must for anyone that repairs or has a Peugeot or Citroen car

I have supplied many of these Laptops and interfaces to garages, Main Dealers, Peugeot and Citroen technicians

And yes it does work 100% with the Peugoet 307 and Citroen C5

For the following Cars and Vans :

Citroen : C-ZERO, C1, C2, C3, C3 XR,C3 L, C3 PICASSO (A58) (Ai58) 

DS 3,DS3 (A55P),DS3 CROSSBACK,

 C4,C4 AIRCROSS, C4 CACTUS (E3),C4 CACTUS (F3), C4 SPACETOURER(B78)

DS 4,DS 4S, C5,C5 R, C5(X7), C5X (E43C), C5 Aircoss, DS 5,DS5 HYBRID 4,

 DS 5LS,DS7 CROSSBACK

C6, C6 (X81) C8, C-CROSSER,

 DS9 E-TENSE, NERO, BERLINGO1 & 2

 BERLINGO(B9)BELINGO(K9),JUMPY,JUMPY (K0), SPACETOURER,

AX, SAXO, BX, ZX, XSARA, XANTIA, XM, EVASION, C15

O2C

Peugeot : ion, 107,108, 206, 207,207+,208,208 (A191), 301, 307, 308, RCZ,

 406, 407, 408, 508, 607, 807, 1007, 2008,2008 (P24),3008,3008 HYBRID 4,3008(P84)

 4007,4008,4008(P84C),5008,5008(P87) BIPPER,

PARTNER,PARTNER (B9)PARTNER 2 PARTNER 2 (B69),PARTNER (K9) RIFTER (K9)

 LANDTREK, EXPERT1, 2 & 3,EXPERT (KO),TRAVELLER, BOXER1 ,2 3 EURO5/6

106, 205, 306, 309, 405, 406, 605, 806

New Opel-Vauxhall models just added:

Opel-Vauxhall: Rocks-E, Corsa F, ASTRA, Combo Life, Combo Cargo,Mokka,

 Zafira Vivaro Lite, Vivaro, Grandland, MOVANO

If you car or van is not in this list please ask

1. Read identification

Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

2.Read fault codes

Displays all stored and pending fault codes with complete description

Program supports report printing or copy to clipboard.

3.Clear fault codes

This function clears all stored fault codes and other diagnostic information.

4.Auto-scan (complete car scan/test)

Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

5.Measured Values

Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

6.Actuator test

Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

7.Programming functions/Adaptation

This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit

Interface Package includes

• Main unit with OBD II cable

• Long 9pin to USB cable

• Short 9pin to USB cable

 Collection welcome