[2023 Elite Version] ANCEL Automotive EVAP Smoke Machine Leak Detector with Service Port Adapter, 12V Small Car Vacuum Smoke Tester Diagnostic Test Tool for All Vehicle

Wide Range of Applications

Free to choose Air/Smoke method to find leaks

how to work with ancel S300 smoke leak detector?

Step1: Fill in 10ml-20ml test oil (baby oil) to the detector
Step2: Disconnect the pipe that needs to be connect with the detector
Step3: Connect detector with DC12V battery,device starts to work
Step4: The pipe will be filled with smoke,check the leak points

2 kinds of modes: AIR model+Smoke mode

Air mode :First, use the air mode to directly measure the leak, and judge whether there is a leak by the pressure gauge value. If it is less than 0.5bar, it will inevitably leak. If it reaches 0.8bar and above, the pipeline tightness is very good.Then there is no need to waste baby oil

SMOKE MODE:After the air mode determines that there is a leak, use the smoke mode to find the leak.

How to judge leakage- through the pressure gauge?

NO Leak: When the value of the pressure gauge remains unchanged and the flow meter will read zero (ball at bottom of scale), it means that there is no leakage in the system.

Small Leak: When the value of the pressure gauge drops and the ball in the flow meter slowly fall to the bottom of the scale, it indicates a small leak in the system.

Massive Leak: When the value of the pressure gauge reaches zero and the flow meter ball never falls to the bottom of the scale, it indicates a large leak in the system.

Adjustable Smoke Output Help To Pinpoint Leaks Quick

Adopt The Latest 5th Generation Technology

Overheat & Anti-frost Protection

Overheat Protection
When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off.

Anti-frost Protection
The device can also work normally at -20℃.

Easy To Detect an Air Leak Vehicle Cabin

Specification

Power source:12V Fully Charged vehicle battery
Current:6A
Flow rate: <6 L/min
Pressure output:0.8-1.0 bar (0.8-14.5psi)

Diagnose All Types Of Leaks With Adapters

ANCEL S100 Product Package:

1pc * ANCEL S100 Car Smoke Leak Detector Main Unit
1pc * Power Cord
1pc * Hook up
2pc * EVAP Kit
1pc * Smoke Delivery Hose
1pc *Air Adpt

ANCEL S200 PACKIING LIST

1pc Power Cord
1pc DeliveryHose
1pc Funnel
1pc Intake Bladder
1pc Service Replacement
1pc Adapter Cone Set
1pc EVAP Adapter
1pc Removal Tool
1pc EVAP Removal Tool

ANCEL S1000 Product Package

1pc * ANCEL S1000 Car Smoke Leak Detector Main Unit
1pc * Power Cord
1pc * Funnel
1pc * Hook up
1pc * User Manual
1pc * Universal Airbag Adapter
1pc * Rubber Connect Parts
1pc * Standard Cone Adapter
1pc * Smoke Delivery Hose

ANCEL S3000 Packing Lists

1x ANCEL S3000 Main Unit

1x Power Cord: To offer connection from the unit to the automobile battery, in order to drive the unit.

1x Funnel: Assistance method for smoke oil refill, to prevent pour oil to the unit surface.

1x Hook up: To hang the smoke machine in the car

1x User Manual: Detailed descriptions about how to use the smoke machine automotive.

1x Intake Bladder: To fit the intake and exhaust, seal the system and introduce smoke into the system. Especially while the inlet position is not rounded-shape.

1x Adapter Cone: To fit the intake and exhaust, seal the system and introduce smoke into the system. It may fall out at high pressure and need a second hand to push and hold at operation.

1x Replacement Rubber: The rubber on the Intake Bladder may be easily broken, if not operate it properly with caution.The rubber could be replaced with new one without replace the whole Intake Bladder.

1x Smoke Delivery Hose: For introduction of smoke from the unit to Adapter Cone / Universal Intake Bladder or to the vacuum pipe directly.