GY-MAX4466 Electret Microphone Amplifier with Adjustable Gain for Arduino

Product Description

Description:

Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts we've tried!

This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x. That's down to be about 200mVpp (for normal speaking volume about 6" away) which is good for attaching to something that expects 'line level' input without clipping, or up to about 1Vpp, ideal for reading from a microcontroller ADC. The output is rail-to-rail so if the sounds gets loud, the output can go up to 5Vpp!

Using it is simple:
connect GND to ground, VCC to 2.4-5VDC.
For the best performance, use the "quietest" supply available (on an Arduino, this would be the 3.3V supply). The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you're connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required.

The output pin is not designed to drive speakers or anything but the smallest in-ear headphones - you'll need an audio amplifier (such as 3.7W stereo amp) if you want to connect the amp directly to speakers. If you're connecting to a microcontroller pin, you don't need an amplifier or decoupling capacitor - connect the OUT pin directly to the microcontroller ADC pin.

For audio-reactive projects, we suggest using an FFT driver library which can take the audio input and 'translate' it into frequencies.

Package Included:

1PC


Note: 

1.We can offer bulk price, if you need large quantityplease feel free to send a message to consult customer service for wholesale price.

2.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.

3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

  • 1.EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right..
    2.If you want to revise the shipping address. Please contact us within 24 hours by ebay message. Because our handing time is 1-3 business day. Thanks in advance for your close cooperation!

1.All the items will be shipped within 1-3 business day by Airmail after the payment is clear.
2.If your shipping address is in United States. Then, your goods will be shipped out by Standard shipping, which tracking number will be shown on eBay. And, usually it takes 10-15 days shipping time.
3.Most times you will receive your order within 10-30 business days after we transfer your package to the delivery company. We cannot guarantee the delivery timeframe if the post office has any unexpected delays due to holiday, weather, customs, or other conditions. Some countries like Russia, Brazil, or some European countries may take up to 50 days or longer for delivery.
4.Please choose some local sellers, if you cannot wait patiently in the shipping time we declared.
5.We appreciate your patience if you haven't received items in 30 days(Russian customers may need more patience by reason of the local delivery system and/or customs). If you are concerned in any way, please feel free to contact us via ebay message instead of leaving negative/neutral feedback or opening a dispute. We will make every effort to fix any problem(resend or refund any missing item).
6.Customs duty is obligation and liability of a citizen in your country, so buyer should be responsible for any tax and custom duty incurred. Generally, the delay or failure delivery is sometimes caused by the policy of different customs. For example, Laser Pointer is unacceptable in some countries. Therefore, please double check your local customs policy carefully before purchase. Or, we will NOT be responsible for any failure delivery related destination customs issue.

  • 1.We accept return or replace goods within 30 days after package signed.
    2.Return police
    1)Quality problem or get wrong item:you can get free change or full refund
    2)Dislike:You can return goods back to us,and get your payment back
    3.Return Shipping Fee:
    1)Quality problem or get wrong item:Shipping free on seller
    2)Dislike:Shipping fee on buyer
  • 1.Any problem after receiving our goods,please contact us before leaving Neutral/Negative feedback.We promise to help you solve it asap,and make you feel satisfactory absolutely.
    2.Please DO NOT leave negative feedback without asking for help.
    Please do not leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.