This was pulled out of a major broadcast studio and was working. I like to test all of the equipment I sell before listing but I have no way of conducting a full blown test on this. I can confirm it powers on, but that’s it. Please see photos for condition. What you see is what you get. I do not have additional accessories. I’m open to offers.
From the manufacturer:
RAT4-OE-MXLR - Overview
Rattler 4, optical (ST, -22 dBm) in to electrical (BNC) OUT; mini-XLR locking cord
Features:
19.4 Mbps to 3 Gbps
Compatible with SMPTE 310M, 292M,
259M, 297M, 424M
Standard formats internally reclocked:
270 Mbps, 1.5 Gbps and 3 Gbps
18 CWDM wavelengths
Up to 50 km distance
Cool, efficient, reliable
Quick, easy installation
LED indicators show you:
Power ON
HD-SDI data presence
Rx optical power levels
Supports embedded audio
Power from 5-16 VDC
Durable, reliable and serviceable
Very low system jitter
>10 dB return loss at 3 GHz
Specifications:
VIDEO
Transmission
method: Digital
Input level: 800 mV p-p
Input
impedance: 75 ohm
Coax equalization
at 2.97 Gbps: 100 m
Output
impedance: 75 ohm
Bit-error rate
at -22 dBm: 10-11
Jitter (pathological
data pattern): <0.2 UI
Rise/fall times: <120 ps
TRANSMISSION
Operating
wavelength: 1310, 1550, or 1270-1610 nm
(CWDM)
Coaxal video connector
I/O: BNC
Optical
connector: ST
Optical source: Laser diode (FP or CWDM DFB)
Optical detector: PIN-TIA diode
Transmitter
output (typ): 1310,1550: -7 dBm
CWDM: 3 dBm
Receiver
sensitivity: -22 dBm
Singlemode
3Gbps*: Link margin: 15-25 dB
Distance: 20-50 km
Multimode
3Gbps*: Distance: 300 m
MECHANICAL/ENVIRONMENTAL
Dimensions (W x H x D):
Singles: 0.75 x 0.75 x 3.2 in
Doubles: 0.75 x 1.5 x 3.2 in
Weight,
each end: 3 oz
Input voltage: 5-16 VDC
Power connector: plug replaceable, mini XLR
Power consumption
(typ.) 600 mW
Indicators: Power, signal, link, optical power
Temperature range,
operating: -25° to 55 °C
Humidity range: 0 to 95 % RH, non-condensing
* Performance may be limited by fiber and installation.