Specification:

Camera:  
* Image Device: 1/3 Inch Color CMOS OV7950 
* Number of pixels:  PAL: 628(H) x 582(V); NTSC: 510(H) x 492(V) 
* TV System: PAL/NTSC 
* Resolution: 420TV lines   
* Minimum Illumination: 0.2Lux/F1.8(0 LuX with LED) 
* Video Output: 1.0vp-p, 75Ohm   
* Gamma Consumption: 0.45   
* White Balance: Auto   
* S/N Ratio: Better than 48dB   
* Electronic Shutter: 1/60-1/15,000 Seconds  
* Video Output: RCA Connector, 1.0Vp-p, 75ohm  
* View Angle: 95° 
* Size: 60.5(L)*27.5(W)*31.6(D)mm 
* Power Supply: DC 12V
* Operating Temperature: -40 to +80 RH95%Max    
* IP67-compliant Dustproof and Waterproof; 
* High Resolution Color CMOS(OV-7950) image sensor; 
* 7 IR LED'S night vision and excellent low lux  performance; 
* The leds will turn on  automatically in dark place. 
* Please take care of the sealing to prevent water  leakage when installation. 
* Projecting distance scale lines onto the monitored  image capable; 
* Mounts easily to existing license plate screws - no  new mounting holes required; 
* Trapeziform  sign direct parking    
* OmniPixel technology for low-light performance      
* The camera switch is controlled by the reverse gear  shift. 
* You can install the camera on  your license plate. During installation, please connect the power cable of the  backup camera to the harness wires that connect to the backup light on the tail  light assembly (Please note that the red wire end is positive, while the black  one is negative). And connect the RCA output end to the car monitor.

　
　 
Monitor: 
* Function:   Mirror Monitor 
* Display Screen:  TFT-LCD   
* Display size :  4.3Inch  
* Display Resolution: 800(H) x RGB x  480(V) 
* TV System:  PAL/NTSC 
* Power:  2W 
* Power supply:  DC 12V
* Video:  2-Channel video input  
* Environment  Humidity:  10% ~ 90%   
* Operating  temperature:  -20 ~ 60 degree  Celsius  
* Storage  temperature:  -40 ~ 85 degree  Celsius 
* Installation:  Install on the  Dashboard, Easy for installation and  uninstallation  
* Car Make:   All Car (Only 12V)
* High Resolution, and excellent color effect; 
* Compatible with both PAL and NTSC system; 
* 2-Channel video input (V1 for DVD player/V2 for  backup camera), automatically switch; 
* Fit all CCTV  camera, car Reversing camera, car DVD player  
* 4.3Inch Car Rear View Monitor helps in preventing  accidents while driving in reverse by avoiding  children, traffic, pedestrians, toys and pets  while backing out of the driveway or parking  space 
* There are 2 RCA video inputs,  one of which connects to VCD/DVD player called 'V1' and the other one connects  to the backup camera called 'V2'. V1 will display first, but when you reverse  your car, it will automatically switch into V2 and when you stop reversing, it  will return to V1 again. 

Package Contains:
1 x 4.3" TFT LCD Mirror Monitor 
1 x Power Cable 
1 x Manual 
1 x Wireless Receiver(lit up red light)  

1 x Wireless Transmitter (lit up blue light)

1 x 7LEDs Waterproof Car Rear View camera 
 
 Installation instructions:
*  The unit that is labeled "2.4 G wireless color video receivers" is the signal receiver. The other unit that is labeled "2.4 G wireless color video" is the signal transmitter.
* Firstly, you should connect the camera with the transmitter. The yellow interface is for video and the red one is for power. Then connect the wire of the transmitter to the backup light of your vehicle. After theses, mount the camera on your vehicle with two screw s. There are two holes on the case of the camera.
* Secondly, Connect the monitor with the receiver, The yellow interface is for video and the red one is for power,the wire of the receiver connects to the reverse circuit in the auto fuse box.