RIBstore's SealSkin is a flexible water-based acrylic sealant applied within the inflatable boat collar / tube.

Great for repairing older inflatable boats, dinghy tubes or RIB collars that are suffering from porosity and minor leaks.

SealSkin is introduced into the deflated inflatable boat tube through the boat valve, the tube is re-inflated. The tube is then tumbled to circulate the sealant which adheres and cures to form an impermeable membrane. If you have a RIB or can't tumble your inflatable, you can still use this product - the following methods can distribute the liquid: bounce the tube about; lower and raise the trailer jockey wheel; take the boat for a trailer ride (or pop the SIB in a van etc).

Also suitable for painting on the inside of inflatable boat seams during manufacture.
Suitable for repair of all makes of inflatables boats and dinghies both Hypalon or PVC boat fabric, including Avon inflatable, Zodiac, Bombards, Valiant and Quicksilver.

• Flexible water based acrylic sealant
• 500ml applicator bottle
• Forms an impermeable membrane
• Enough for a 2.4m-2.7m (8-9ft) inflatable or at a rate of 90ml-100ml per linear metre of tube
• Note: major/ visible punctures or tears should be repaired with a suitable repair kit before applying SealSkin

 Safety Data Sheet/MSDS is available