Specifications:
DM542/DM542 Upgraded (New Promotion):
DSP digital driver, microstep divided into 16 types, with a step count of 25600 steps per revolution; Current range: 1.0A-4.2A, with half current, overvoltage, overcurrent and other protective circuits. This driver is powered by DC and operates within the range of DC 20V-50V.
Model | DM542 Standard - DM542 DC20-50V / Neutral DM542 DC20-50V | DM542 Upgraded - DM542 Upgraded DC20-50V |
Current range | 1.0A-4.2A | 1.0A-4.2A |
Voltage range | 20-50V DC | 20-50V DC |
Subdivision | 400-25600 | 400-25600 |
Phase number | Supports two-phase stepper motors | Supports two-phase stepper motors |
Matching motor | 42/57/86 (86 motor length below 100mm) | 42/57/86 (86 motor length below 100mm) |
Pulse signal | Supports 3.3V/5V/24V | Supports 3.3V/5V/24V |
Chip | Third generation 32-bit DSP processor | Third generation 32-bit DSP processor (approximately 10% performance improvement, 10% temperature reduction) |
Radiator | With radiator | Without radiator |
Anti-interference | Strong | Strong |
Connection | the same | Same (compatible with DM542 standard version) |
Advantages comparison | Stable and durable, with good performance and low heat generation | Stable and durable, with improved high-speed performance compared to the old model and reduced heat generation. |
External dimensions | 118*75.5*33 | 116*69*26.5 |
Model | DM542S economy model - DM542S DC20-50V / Neutral DM542S DC20-50V | DM542C (small volume) - DM542C DC12-36V |
Current range | 1.0A-4.2A | 1.0A-4.2A |
Voltage range | 20-50V DC | 20-50V DC |
Subdivision | 400-25600 | 400-25600 |
Phase number | Supports two-phase stepper motors | Supports 42/57 two-phase stepper motors |
Matching motor | 42/57/86 (86 motor length below 100mm) | 42/57 motor |
Pulse signal | Supports 3.3V/5V/24V | Supports 3.3V/5V/24V |
Radiator | With radiator | With radiator |
Chip | Second generation processors | Third generation 32-bit DSP processor |
Anti-interference | Strong | Strong |
External dimensions | 118*75.5*33 | 96*60*33 |