Product Description
Since the sticker is rolled up during transportation, when you receive the product, you will see bubbles in the transfer membrane, but the sticker is intact, it will not have any impact on your stickiness and effect. After the sticker is finished, the transfer membrane needs to be removed.

INSTALLATION DETAILS
1. After cleaning the car to remove dust, spray water on the car to reduce the viscosity of the sticker.
2. After removing the bottom paper of the sticker, spray more water on the side of the sticker with glue to reduce the viscosity, which is convenient for adjusting the position and removing bubbles.
3. After sticking the sticker on the car body, lift the sticker on one side and scrape it slowly from the other side with the card, while scraping the bubbles while adjusting the position of the sticker until the entire sticker is scraped.
4. After scraping off the air bubbles, wait for the water in the sticker to dry before removing the transfer membrane.

SPECIFICATIONS:
PACKAGE INCLUDES: 1 * Hood sticker (grid).
Material: Vinly 
Size: 47.2x7.8inch (120x20cm).
Color:  White

TIPS:
- When using:
Do not wax the car one week before using the sticker. The wax will make the sticker not sticky.
Do not use sticker when the car is hot.
Do not wash your car within one week after filming. It is best not to expose it to exposure within 24 hours.
- When clearing:
Gently scrape the edges of the sticker with your fingernails and tear it off. In the winter, the sticker can be properly heated by a hair dryer, and it can be easily removed after being softened.

NOTE:
1. Due to manual measurement, please allow a deviation of 1-3 mm.
2. If you find any problems, please leave us a message and we will answer your questions.