Do you live in a place with limited space and worry about insufficient hot water supply? We have a good solution to such problems! This mini water heater can quickly heat water in just a few seconds and has good safety, allowing you to enjoy a continuous supply of hot water in a limited space. It can make your daily washing and cleaning activities warmer, making your winter no longer cold.
Specifications
Model: XY-FC
Color: Red
Style: Modern
Shape: Rectangle
Material: Brass, ABS, 304 Stainless Steel, 316L Stainless Steel
Surface Treatment: Pickling
Plug: US-Standard
Power Source: Corded Electric
Water Inlet Mode: Bottom Water Inlet
Mounting Type: Wall-Mounted, Floor-Mounted, Under Sink
Temperature Regulation Range: 20-50°C/68-122°F
Power Cord Length: 1.05m/3.44ft
Assembly Required: Yes
Number of Items: 1
Power: 3000W
Voltage: AC 110V
Frequency: 50-60Hz
Waterproof Level: IPX4
Water Pressure: 0.04-1.2MPa
Wire Request: Wire Cross Section ≥2.5mm²/0.0038in²
Using a stainless steel heating core with 3000w large power, this water heater can deliver constant hot water, allowing you to experience the warmth without storing water for preheating, which saves time/energy and prevents sediment/scale accumulation.
You can control the water temperature(20-50℃) by adjusting the water flow(large water flow, low temperature; small water flow, high temperature), providing you with hot water that fits four seasons in a year.
Suggest Minimum Reserved Installation Space: 30*30*25cm/11.81*11.81*9.84in
Gross Weight: 1.1kg/2.42lbs
Net Weight: 0.95kg/2.1lbs
Product Size: 11*7*20cm/4.33*2.8*7.87in
Tank Length: 16cm/6.3in
Package Size: 23.5*9.5*18.5cm/9.25*3.74*7.28in
1*Water Heater
1*English Manual
All Accessories for Assembly
|
|
|
|
---|---|---|---|
A Safe HeaterThe various protections such as leakage protection, dry-heating protection, anti-electric wall technology, water-electricity isolation, sensor fault protection, and grounding protection and IPX4 waterproof rate make it safe to use without any worries. |
Premium Material&Instant HeatingPremium Material:The instant water heater uses stainless steel and high-quality ABS materials with injection molding, making it sturdy and long-lasting. Instant Heating: Using a stainless steel heating core with 3000w large power, this water heater can deliver constant hot water, allowing you to experience the warmth without storing water for preheating, which saves time/energy and prevents sediment/scale accumulation. |
LED Display&Cost-effectiveLED Display: The digital screen displays the water temperature(℃/℉ conversion: Press the on/off key, and then press and hold it for more than 6s to switch ℉. Vice versa.), allowing you to keep track of the water temperature. Cost-effective: Only when it is used the water can be heated to the required place, eliminating the waste of unused water in the long water pipeline between the central water heater and each faucet, delivering hot water faster and reducing energy costs. |
Mini Appearance&Easy to InstallMini Appearance: This mini wall-mounted black instant water heater of 4.6*2.8*6.3 inches size plays a decorative role and does not occupy much space. Easy to Install: With the equipped accessories, premade fixing screw holes, English manual, and 1/2 inch standard interface, you can install this heater easily. |
Brass Interfaces: The water inlet and outlet adopts brass material, making them corrosion-resistant, stable, anti-rust, and high-temperature-resistant.
Touch Button: The new-generation touch button with electronic control has a longer lifespan and good sealing. It resists wet and watery environments and avoids mechanical failure of buttons.
Power Cable: The 3.28ft power cable allows for easy installation in a wider range.
How to Install
1.The unit is mainly for sinks, not for shower purposes. Please verify this unit is the right size for you before buying. The wire is required to be more than 2.5m² and the circuit breaker switch is greater than 32 A. You need to prepare a water pipe, valve, and other excluded accessories yourself.
2.It must be installed vertically upward instead of horizontally, sideways, or flatly. Please properly ground the ground wire during installation, and it is forbidden to use a mobile socket. Beware of potential safety hazards in electricity use. Improper installation may lead to major safety hazards. It is recommended to install by professionals instead of yourself.
3.Please make sure the water heater is mounted firmly to bear the weight of the water heater after it is filled with sufficient water. The electric water heater should be installed indoors, where the ambient temperature is above 0°C. The pipeline should be centrally arranged and the hot water outlet should not be too far from the hot water use point.
4.The power switch should be installed on the cabinet and should not be touched by water. During installation, pay attention to the safe distance between the water heater and the gas pipeline, and keep the water heater at least half a meter away from the gas appliances, gas pipelines, gas meters, and other sources.
5.The length of the water outlet pipe of the water heater is recommended not to exceed 3m. Otherwise, the water pressure may not be enough to start the machine because the water pipe is too long. (If the water tower is used in rural areas, the height of the water tower is required to be higher than 10m to make the water pressure reach the starting value).
6.If the display screen shows E1(overtemperature), E3/E4, or temperature sensor failure, first cut off the power, use cold water to pass through the machine once, and then use it when powered on. Note that the water flow should not be too small at ordinary times.
7.Please make sure cold water flows through this water heater before your first time use.
8.Please check whether the power supply is normally powered on. The indicator light on the power-on display will show the temperature, but it will not light up if it is not powered on. If the temperature does not rise, you can press the temperature control switch or replace the heating pipe.
9. If there is a display without heating and the display shows that the marquee lamp turns around, it means that the water flow has not passed through the water heater, the water pressure is too low, or the installation direction is wrong. Note that the water inlet and outlet should be installed correctly. However, if the water pressure is enough and the water flow does not heat, then check the water inlet turbine of the water heater. It may be that something dirty is blocking the turbine, causing the water heater to not start.
10.Please read the English manual carefully and completely before use. And pay attention to the safety instructions included.
You can only control the water temperature by adjusting the water flow(large water flow, low temperature; small water flow, high temperature)
The unit is mainly for sinks, not for shower purposes.
Power Source | Corded Electric |
---|---|
Tank Lining Material | 304 Stainless Steel |
Feature 1 | Easy installation,Convenient Use,Easy Operation |
Size | Approx. 13.5 x 6 x 16.5cm/ 5.31 x 2.36 x 6.59" |
Plug | US Plug |
MPN | Does Not Apply |
Start-Up Pressure | 0.4-0.6MPa |
Rated Pressure | 0MPa |
shipping notice | Can not ship to Puerto Rico,Alaska/Hawaii |
Energy Star | B |
Item Height | 6.59" |
Voltage | 110V |
Amperage | > 32A |
BTU/h Heating Rating | Does Not Apply |
Features | Electric |
Water Temperature Range | 35-45℃ |
Item Width | 2.36" |
First Hour Recovery | Does Not Apply |
trip switch | > 32A |
Waterproof Rate | IPX4 |
EC Range | A+++ - G |
Color | Red |
Water Connection | Does Not Apply |
Rated Voltage | 110V |
Brand | Unbranded |
Type | Tankless Water Heater/Boiler |
Heating System | Instantaneous (Tankless) |
Note | not ship to Canarias |
Model | Does Not Apply |
Frequency | 50Hz |
Jacket Diameter | Does Not Apply |
Item location | CA /NJ /Austell |
Rated Power | 3000W |
Mounting Location | Indoor |
Heating Material | 304 Stainless Steel |
Power | 3000w |