​​​​​​​RUZZIAN BARBARIANS ATTACKED MY COUNTRY!

BUT DON'T WORRY, WE SHIP ORDERS AS USUAL!!! SUPPORT UKRAINE!!! 



BUY
You are buying:
UKRAINIAN

HGW 248903 1/48 Decal for F4U-1A Corsair VF-17 Jolly Rogers Part 2 Wet transfer

BONUS
INSIDE
Fast Shipping
IN STOCK
Positive Feedbacks
Trusted Supplier

Now shipping could takes a week longer than usual. ruZZian invaders basely attacked our country on February 24 under cover of night at 5 am. These bastards have already killed thousands of civilians and destroyed cities. This is an Army of murderers, barbarians and marauders. ruZZian soldiers are a disgrace to humanity. Orcs must be expelled and destroyed. Support Ukraine! Support Ukrainian model kit brands in such dark times.

Manufacturer: HGW
Country: Czech Republic
Scale: 1:48
Material:  Decal
Condition: New

The preparation of the surface prior to the application of the HGW Wet Transfer:
The HGW Wet Transfer technology has been tested on Gunze brand paints and preparations.
Carry out the test (not on the model), if you are applying to paint made by a different manufacturer.
We recommend to spray the surface with a glossy varnish in order to achieve a perfect result.
No matter whether you are applying the transfer onto paint or varnish, it is advisable to go over the surface using sandpaper of a grade from 6 000 to 8 000.
Naturally, it is also essential to ensure that the base is clean, grease-free and clear of dust.
 
You will need:
a scalpel,
sharp tweezers,
the Mr. Mark Softer product by Gunze,
a cotton bud and clean cloth.
 
Step by Step:
 
1. Cut out the required design using a sharp scalpel.
2. Soak the base paper in warm water (approx. 20 sec).
3. Remove the transfer from the base paper.
4. Apply a layer of Mr. Mark Softer on the surface where you intend to apply the transfer.
5. Place the transfer in the required position on the layer of Mr. Mark Softer.
6. Carefully press out any excess liquid and bubbles. (Use the cloth and the cotton bud.)
7. Ideally, leave it to dry for 6-8 hours.
8. Carefully remove the transparent transfer film.
9. Clean off any traces of transfer glue with a wet cloth.
 
BUY NOW!


FAST WORLDWIDE SHIPPING!

10-14 business days!

SAME DAY SHIPPING!​​​​​​​





We do ship ONLY with Tracking Number.

We do not include any invoices to package to avoid custom taxes.

Your model kit box could be flattened to prevent high-volumed package which often checked by customs for taxes


In rare cases if your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.



          Shipping

          Payment

PAYPAL and Credit Cards


          Returns


If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.


You can return a product for up to 30 days from the date you purchased it.


Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

See our other items

High Quality
Best Offers
Fast Shipping
We do have own warehouse 
Manufacturer: HGW Country: Czech Republic Scale: 1:48 Material: Decal Condition: New The preparation of the surface prior to the application of the HGW Wet Transfer: The HGW Wet Transfer technology has been tested on Gunze brand paints and preparations. Carry out the test (not on the model), if you are applying to paint made by a different manufacturer. We recommend to spray the surface with a glossy varnish in order to achieve a perfect result. No matter whether you are applying the transfer onto paint or varnish, it is advisable to go over the surface using sandpaper of a grade from 6 000 to 8 000. Naturally, it is also essential to ensure that the base is clean, grease-free and clear of dust. You will need: a scalpel, sharp tweezers, the Mr. Mark Softer product by Gunze, a cotton bud and clean cloth. Step by Step: 1. Cut out the required design using a sharp scalpel. 2. Soak the base paper in warm water (approx. 20 sec). 3. Remove the transfer from the base paper. 4. Apply a layer of Mr. Mark Softer on the surface where you intend to apply the transfer. 5. Place the transfer in the required position on the layer of Mr. Mark Softer. 6. Carefully press out any excess liquid and bubbles. (Use the cloth and the cotton bud.) 7. Ideally, leave it to dry for 6-8 hours. 8. Carefully remove the transparent transfer film. 9. Clean off any traces of transfer glue with a wet cloth.


​​​​​​​RUZZIAN BARBARIANS ATTACKED MY COUNTRY!

BUT DON'T WORRY, WE SHIP ORDERS AS USUAL!!! SUPPORT UKRAINE!!! 



BUY

HGW 248903 1/48 Decal for F4U-1A Corsair VF-17 Jolly Rogers Part 2 Wet transfer

BONUS
INSIDE
IN STOCK
You are buying:
UKRAINIAN
Manufacturer: HGW
Country: Czech Republic
Scale: 1:48
Material:  Decal
Condition: New

The preparation of the surface prior to the application of the HGW Wet Transfer:
The HGW Wet Transfer technology has been tested on Gunze brand paints and preparations.
Carry out the test (not on the model), if you are applying to paint made by a different manufacturer.
We recommend to spray the surface with a glossy varnish in order to achieve a perfect result.
No matter whether you are applying the transfer onto paint or varnish, it is advisable to go over the surface using sandpaper of a grade from 6 000 to 8 000.
Naturally, it is also essential to ensure that the base is clean, grease-free and clear of dust.
 
You will need:
a scalpel,
sharp tweezers,
the Mr. Mark Softer product by Gunze,
a cotton bud and clean cloth.
 
Step by Step:
 
1. Cut out the required design using a sharp scalpel.
2. Soak the base paper in warm water (approx. 20 sec).
3. Remove the transfer from the base paper.
4. Apply a layer of Mr. Mark Softer on the surface where you intend to apply the transfer.
5. Place the transfer in the required position on the layer of Mr. Mark Softer.
6. Carefully press out any excess liquid and bubbles. (Use the cloth and the cotton bud.)
7. Ideally, leave it to dry for 6-8 hours.
8. Carefully remove the transparent transfer film.
9. Clean off any traces of transfer glue with a wet cloth.
 

Now shipping could takes a week longer than usual. ruZZian invaders basely attacked our country on February 24 under cover of night at 5 am. These bastards have already killed thousands of civilians and destroyed cities. This is an Army of murderers, barbarians and marauders. ruZZian soldiers are a disgrace to humanity. Orcs must be expelled and destroyed. Support Ukraine! Support Ukrainian model kit brands in such dark times.

BUY NOW!

          Payment

PAYPAL and Credit Cards


          Shipping


FAST WORLDWIDE SHIPPING!

10-14 business days!

SAME DAY SHIPPING!​​​​​​​





We do ship ONLY with Tracking Number.

We do not include any invoices to package to avoid custom taxes.

Your model kit box could be flattened to prevent high-volumed package which often checked by customs for taxes


In rare cases if your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.



          Returns


If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.


You can return a product for up to 30 days from the date you purchased it.


Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

Fast Shipping
Best Offers
High Quality

See our other items

We do have own warehouse