These LED Illuminated rocker switches are DPDT - Double Pole Double Throw. These are latching switches so will stay in position until moved

Ratings:

250V AC 15A

125V AC 20A

The LED Illumination is bright at mains voltage. These use a neon lamp so will not glow at less than 90 Volts or so and not at lower voltages.

The switch remains illuminated when the centre pins are powered so is lit all the time in any position.

DC Current is not specified but as DC switching is harder on the contacts I would suggest half the AC value or 7-8 Amps if at 12V DC. Which will work fine with no illumination unless over 90 V approx.

Terminated with 6mm wide Spade Connectors that also have holes for direct soldering.

Connections:

Power goes to the centre Pins and the load(s) connect to the front / back pairs. With off in the centre.

Dimensions: (close approximate)

Height: 28mm or up to 35mm from contacts to top of lever

Length 32mm

Width 27mm

Panel Hole Size:

Length: 28mm x Width 21mm

Thankyou for looking at this item. If you have any questions, please let me know.

Also please see my other items as I stock a variety of switches and torches etc.

Regards 

Mickpic