High temperature resistant battery box, excellent structure helps to dissipate heat during use
The battery box comes with insurance, safe to use
Double-sided battery
A variety of protection boards can be selected from
No welding design, simple installation M4 copper pillar conductive
It is best to choose the protection board when placing the order to avoid overcharge, over discharge and voltage imbalance during use. It is best to choose our dedicated charger. If other chargers are used, you need to choose a DC connector. , It is recommended that each layer does not exceed 1a charging current
Instructions:
You can install the battery directly after receiving it. The direction and polarity of the battery installation are subject to the symbols on the circuit board
After installing the battery, the direction of the notch is the same, and then screw on the copper pillar,
After the copper pillar is installed, confirm that there is no problem, you can install the cable, and you can use it after the cable is connected
Specifications:
Size & Weight : 19.7*8.8*4.5cm & 180g (13S); 19.7*8.8*2cm & 98g (13S/ 14S 20A); 19.7*8.8*2cm & 150g (13S/ 14S45A); 19.7*8.8*4.5cm & 191g (14S)
Voltage: 13s fully charged 54.6V, discharged 37.7V; 14s fully charged 71.4V, discharged 49.3V
Current: The average instantaneous maximum of each layer is 20A, and it is recommended to be below 10A for a long time (the actual current is determined by the battery performance)
Type: 13S; 13S 20A BMS; 13S 45A BMS; 14S; 14S 20A BMS; 14S 45A BMS (optional) (Note: 13S and 14S do not include the protection board)
Package Include:
1 x Battery Case
Note:
If there is no protection board layer, the output terminal will have no voltage, because the protection board is connected in series in the circuit. If there is no protection board, the output is open